Home > Appliances > Water Heaters >

90073 Gas/Electric XT Water Heater - 6 Gallon
Atwood 90073 Gas/Electric XT Water Heater - 6 Gallon
Atwood 90073 Gas/Electric XT Water Heater - 6 Gallon


 
Alternative Views:


Price: $621.92
MFG P/N: 90073
MFG: Attwood
UPC #: 692931900735


Quantity in Stock :

Availability: Out of Stock
Product Code: 80-8709
No Longer Available

Description Instructions
 
The Atwood 90073 Gas/Electric XT Water Heater - 6 Gallon gives you the equivalent of 9 gallons of hot water in the same smaller 6 gallon size. The XT will heat up cold water to a higher temperature, then mix it with additional cold water to provide you with 50% more hot water.
  • Mixing is made possible through the rear mixing valve that is already installed.
  • Install in the same size cut-out dimensions as standard 6 gallon Atwood models.
  • Winterizing bypass kit is already built in.
  • Aluminum tank is light weight and eliminates the need for an anode rod.
  • Dimensions: 16"W x 12 1/2"H x 19 1/2"D
  • Propane Output: 8000 BTU
  • Electric Output: 1400 watt
  • Weight empty: 23 lbs.
  • Mfr. 2 year limited warranty
A simple flip of the switch from inside your RV turns the water heater on or off. Almost all of all components are accessible through the exterior door. This reduces service time and virtually eliminates the need for service personnel to enter your RV. The Atwood XT water heater features a high temperature limit switch, thermostat, and pressure and temperature relief valve for the ultimate in water heater safety. An externally sealed combustion chamber keeps the outside of the unit clean. Matching access doors are available (sold separately) and can easily be painted to match the exterior of your camper or motorhome.

Atwood 90073 Gas/Electric XT Water Heater - 6 Gallon

Additional Product Information
  • Save Money—The Atwood XT comes pre-configured for installation with a winterizing bypass capability, reducing OEM’s installation expense. The Atwood XT can also be installed in the same cut-out space as the current, popular Atwood Water Heater, saving OEMs the expense of having to redesign their coaches to accommodate for bigger, bulkier, heavier water heaters.
  • Save Time—The Atwood XT pre-configured winterizing capability eliminates one additional, time-consuming installation step. The valve, hose, tee, and thermostatically-controlled mixing valve, with a check valve and a cold water passage, allows you to isolate and drain the tank and pump antifreeze through the plumbing circuit. Because Atwood has greatly increased hot water output while maintaining the size and weight of the water heater, OEMs can simply install the Atwood XT in the same cut-out dimension that they have grown accustomed!
  • Save Weight—A comparable 16-Gallon water heater would weigh about 50 pounds more with the weight of 6 gallons of water and the additional material needed to build a larger water heater than the 10-gallon XT. The Atwood XT uses Exothermal Technology to provide the equivalence of 16-Gallons of hot water while maintaining the same weight as the best-selling, popular Atwood Water Heaters the industry has grown accustomed to. A comparable 9-gallon water heater would weigh about 25 pounds more than the 6-gallon XT.
  • Save Space—Atwood’s Exothermal Technology has increased the hot water output of the Atwood XT Water Heater, not the size of the water heater! While some manufacturers are trying to provide additional hot water by creating bigger, bulkier, heavier water heaters, Atwood provides a more efficient solution—