Click here to download the following installation instructions in PDF format

• Revolution 200 LED Bulb Included
• 12 -Volt operation
• Easy to install... uses same hole pattern as most standard lights
• Reverse polarity protected - If wired wrong, it will not damage the unit. Simply switch the connecting wires, re-test and the fixture will work properly
• Daylight sensor installed - will not come on in daylight while in motion detection mode
• Senses coach battery function - LED blinks battery condition
• If your house battery voltage drops to 11.5 volts, then The Smart Light^® will cease to function as motion light in order to save your battery life

The Smart Light is microprocessor controlled giving it intelligence such as motion detection, low voltage detection, daylight automatic shutoff and reverse polarity protection.  The Smart Light is designed for 12- volt applications such as lighting RV entryways and camping areas. It is low profile at 2 inches allowing it to be mounted on any side of the RV. Installation is easy with the same hole pattern as most standard lights. 

The Motion Detection Alert function, when enabled, will turn the main lighting fixture on any time motion is detected within the sensors range. During daylight hours, Starlights Inc. has made every effort to set the fixtures ambient light sensor to turn the lighting fixture off but in some cases when the fixture is mounted under the canopy or shaded by a tree, the lighting fixture may still trigger and energize the bulb. In these cases the lighting fixture will have to be turned off with the inside switch. The Motion Detection function can be turned on or off using the light power switch. Switching the inside switch to the on position will power up the SL1000 in manual mode. The fixture can be switched, while in manual mode, to auto sensing mode by simply switching the inside switch off and then on again. The fixture can be returned again to manual mode by switching the inside switch off and then on again.

Technical Specs