Installation Instructions: [Click Here]

How it works -The Aquajet ES is a digitally controlled pump that automatically adjusts motor speed to maintain pressure as multiple water fixtures are used. Eliminates irritating pressure drops and the need for bulky accumulator tanks.

Weight: 8 lbs.

Dimensions: 4 7/8"w x 9"l x 4 1/2"h

What's included: Complete pump, (2) 1/2" Hose Barb Fittings

Requirements: The 5-chamber Aquajet ES Series is more powerful than most existing RV water pumps and, as a result, may draw more current Amps than the pump it is replacing. It is imperative that any power supply, fuses/circuit breakers, wiring, switches, connectors, or controllers that are used to supply 12 VDC to the pump are adequately sized. Inadequately sized components may overheat, causing an electrical fire.

Additional Items Needed: May need new wire nuts or electrical connectors.

Warranty: 2 year manufacturer warranty.

SPECIFICATIONS:

• MOTOR: TYPE: 12 VDC, Permanent Magnet,Totally Enclosed, Non-Ventilated LEADS: 14 AWG, 12" Long, Black Negative, Red Positive REVERSE TEMP. LIMITS: Safe to 150 F (66 C)
• SPEED CONTROLLER: Factory Set to Approximately 6 1/2 Amps Max. Thermally Protected to Avoid Component Damage.
• CAUTION: Exterior Surfaces (heat sink),May Exceed 150°F After Only 5 Minutes of Operation.
• PUMP DESIGN: 5 Chamber Diaphragm Pump, Self Priming, Capable of Being Run Dry
• PUMP HOUSINGS: Polypropylene
• CONTROLLER HOUSING: Nylon
• DIAPHRAGM: Santoprene
• FASTENERS: Stainless Steel
• LIQUID TEMPERATURE: 140 F (60 C) Max.
• PUMP CERTIFICATIONS: IAPMO, NSF
• PRIMING CAPABILITIES: 13 Feet