|
Other Items from Appliance Circuit Boards
Dinosaur 24 VAC "Park Model" Replacement Ignitor Board - Use in Furnaces: Duo-Therm®, Hydro-Flame®, Suburban® Works in “Park Model” furnaces which use a 24 volt AC ignitor board. This board also has the same great features as the other Universal Ignitor Boards. Includes a fuse on the board to protect the board's 24 volt circuits from short circuit damage and a green light to show power to the board and a red light to indicate power to the gas valve. For 24 VAC furnaces only.
Dinosaur Ignitor Board Tester - Dinosaur Electronics, Atwood, Channel Products, Fenwal, Gasliter, Ram. Can separately test the local and remote sense circuits. Includes test cables, charger and instructions. Tests most 12 volt DC ignitor boards. Portable 12 Volt tester with a built-in battery can test 75-100 boards before it needs to be recharged.
Dinosaur Micro P-246 Plus Circuit Board For Dometic - Features a circuit breaker on the board to protect 12 volt circuits from short circuit damage and a short circuit indicator that indicates shorts in wires to the main switch or interior light. Heavy-duty diode trips circuit breaker if the 12 volt DC is hooked up backwards. Fuses on the 120 volt AC circuits give you protection from short circuits in the heater wires and element.
Dinosaur Micro P-1338 Rev5 Circuit Board For Dometic - Features a circuit breaker on the board to protect 12 volt circuits from short circuit damage and a short circuit indicator that indicates shorts in wires to the main switch or interior light. Heavy-duty diode trips circuit breaker if the 12 volt DC is hooked up backwards. Fuses on the 120 volt AC circuits give you protection from short circuits in the heater wires and element.
Dinosaur Replacement Refrigerator Board For Norcold 2-Way - AC/Gas For Use In NORCOLD®:652, 662, 682, 6052, 6062, 6082, 6162, 6182, 6621M, 6821M. Features a circuit breaker on the board to protect 12 volt circuits from short circuit damage and a short circuit indicator that indicates shorts in wires to the main switch or interior light. Heavy-duty diode trips circuit breaker if the 12 volt DC is hooked up backwards. Fuses on the 120 volt AC circuits give you protection from short circuits in the heater wires and element.
Dinosaur Replacement Refrigerator Board For Norcold 3-Way - AC/DC/Gas For Use In NORCOLD®:653, 663, 683, 6053, 6063, 6083, 6163, 6183, 6631M, 6831M. Features a circuit breaker on the board to protect 12 volt circuits from short circuit damage and a short circuit indicator that indicates shorts in wires to the main switch or interior light. Heavy-duty diode trips circuit breaker if the 12 volt DC is hooked up backwards. Fuses on the 120 volt AC circuits give you protection from short circuits in the heater wires and element.
Dinosaur Fan 50 Plus Ignitor Board - With this board installed in your furnace, the fan will no longer run all night blowing cold air. Board knows when the propane has run out or if the furnace did not light, and shuts the fan off one minute after the third try. It has the same great design features as the other Universal Ignitor Boards, but with an added fan control relay. For RV furnaces only.
Dinosaur Replacement Ignitor Boards - Use in Dometic® and Norcold® refrigerators. Use in Coleman®, Duo-Therm®, Hydro-Flame® and Suburban® furnaces. Use in Atwood®, Mor-Flo® or Suburban® water heaters. Works in any furnace, refrigerator or water heater that uses a standard ignitor board. Includes spade connectors for the spark lead.
Replacement Refrigerator Board , Dometic® - Replaces all of Dometic's® "black box" boards. Works in 2-way (AC, gas) and 3-way (AC, DC, gas) units with all types of eyebrows. It features an improved thermocouple circuit to eliminate the recurring check light problem. A food saver keeps the refrigerator operating if the eyebrow board or communication link fails. A temperature control knob allows you to choose the full temperature range on fixed temperature refrigerators. It also allows for"aging" compensation in the units that have a 1-2-3-4-5 temperature adjustment panel. Fuse protected on the 12 VDC supply, DC element and 120 VAC circuit. Simple installation, works in units with or without the wiring upgrade kit and includes detailed instructions.
|
