What it does: When dry camping and your gray tank gets filled, you can transfer the gray water from the gray tank to the black tank and make more gray water. Empty your tanks any time you need to, quickly, safely and cleanly. No rinsing the tanks with another water hose, do it all internally
How it works: The macerator pump suctions the waste from the tank, grinds it up to 1/8th inch or less and transfers it through a 1" hose to the waste receptacle. It will allow you to rinse the black tank with soapy water from the gray tank, which will help to degrease the black tank and keep the tank and the indicator lights working properly. Just hook up to the 3” sewer pipe and two wires to the 12 volt dc power supply and you are ready to pump your tanks. 22 feet of service hose, 20 amp breaker and completely assembled ready to use. What's included: (1) 7' expands to 21' - 1" dia. discharge hose
(1) contol box which - includes, macerator pump & on/off switch
(1) expanding 45 degree hose end with drip cap.
(1) wiring kit - includes 10 guage wire, terminals, 20 amp resetting fuse.
(1) gray water bypass kit - includes 3/4" hose.
Installation: Step by step detailed instuctions will be avialble online soon, kit does include full instructions.
Requirements: This model is design for motorhome applications.
Tools: Drill, phillips screw driver, flat blade screw driver, wire crimpers & wire cutters.
Time & Difficulty: Other than locating a 12 volt power source this is a very easy project to install. Installation time is 15 minutes to 1 hour.
Additional Items Needed: None
Features & Information: Check out the FAQ section where we have tried to answer every possible question -->
Click Here
