 |
 |
 |
|
The Ecocamel Descaler utilizes magnetic fields to change the polarity of compounds in limescale and stops it from sticking to metal surfaces like pipes, immersion heaters, and the insides of kettles.
- Ideal for on your rising water main, where water enters your home (typically under your kitchen sink).
- Fits a standard 15mm pipe.
- It will fit on copper or plastic piping but should not be used on lead pipes.
- Improves the efficiency and life of kettles, coffee machines, and reduces the amount of detergent needed in washing machines and dishwashers.
- Saves you money on replacement water heaters, boilers, washing machines, kitchen and bathroom fixtures, flush valves and piping.
- Removes existing scale and prevents new scale from forming.
- No screws, no electricity, just simple, energy efficient magnetism.
- Significantly improves your water texture.
- Helps prevent dry skin, lackluster hair and stiff laundry.
- Can help with dry skin conditions such as eczema, psoriasis, etc.
- User-friendly design installs in seconds, no pipe cutting required.
- No corrosive salts are added to the water system.
- No running costs or maintenance required.
- Dimensions: 4.56" H x 2.36" D x 6.29" circumference.
- Weight: 1.25 lbs.
- 1-Year Manufacturer Warranty.
Ecocamel Descaler - Single
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
How Does the Descaler Work?
The Descaler causes the microscopic compounds in the form of scale to be released back into the water flow of water and therefore revert back to their original compounds when re-entering the water flow. Treated water does not change or alter any of the natural mineral content of water so essential for life. All the 'healthy minerals' in our drinking water are preserved, whilst making the water you drink taste better. Magnetized water is 'energized' which causes plants, vegetables, and fruit to grow faster, live longer, and be more productive - great for horticulturists.
How to Install:
Simply take it out of the box, slide it apart, put one half at the back of your mains inlet pipe and slide the top half back onto it. Then just leave it to do its work. To fit the descaler, your main inlet pipe would need to be an inch minimum away from the wall. The descaler slides into place so it can be fitted in a confined space. You would, however, need about four or five inches of free pipes above or below where you intend to place it, in order to slide the two halves together.
Important Note: Do not handle the magnets if you are on a heart pacemaker or similar as the magnets are very powerful. If you wear a quartz watch or have credit credits nearby, remove them before handling the magnets as the magnets will stop your watch and wipe your credit cards clean.
|
|
|
|
|
|
|