Home > Sealants > Roof Sealants & Coatings >

Seal KS0065125-18 Storm Patch Rubberized Leak Sealant - Black - 12 Oz
Kool Seal KS0065125-18 Storm Patch Rubberized Leak Sealant - Black - 12 Oz
Kool Seal Storm Patch Rubberized Leak Sealant - Black - 12 Oz


 
Price: $6.50
MFG P/N: KS0065125-18
MFG: KST Coating
UPC #: 50926002213


Quantity in Stock :

Availability: Out of Stock
Product Code: 82-8752
No Longer Available

Description
 
The Kool Seal Storm Patch Rubberized Leak Sealant prevents moisture penetration and corrosion on common building materials and surfaces.
  • Recommended for use on metal, aluminum, masonry, plastic, asphalt, fiberglass, shingles, cedar shake, acrylic roof coatings, and cement and shake.
  • Best results when air and surface temperature is between 40 degrees Fahrenheit and 80 degrees Fahrenheit.
  • Ensure your surface is completely dry and free of dirt and other foreign matter which could prevent proper adhesion.
  • Dries to touch in approx 10 minutes. Drying time depends on temperature, humidity, and film thickness.
  • Can be coated with Kool Seal Elastomeric Coatings in 24 hours.
  • Use mineral spirits for cleanup.
  • Up to 15 square feet of coverage rate.
  • Sealant Color: Black
  • Sold as a 12 oz aerosol can.
  • Weight: 1.04 lbs.

Kool Seal Storm Patch Rubberized Leak Sealant - Black - 12 Oz

Additional Product Information
How to Apply:
1. Shake can for 2 minutes after ball within begins to rattle. Continue to shake for 10 seconds after each minute of use.
2. Test spray in an inconspicuous area for compatibility.
3. Hold can 12" - 16" from the surface, spray in a sweeping motion from side to side with a slight overlap.
4. Apply multiple thin coats.
5. To prevent clogs after use, hold can upside down and spray until clear gas appears. To clean paint on the dial, wear eye protection and wipe off with lacquer thinner. DO NOT stick the pin in the dial opening.
6. Recycle empty can per local regulations.