The LSL Products PRO-VCS Programmable Voltage Controlled Switch consists of one or two voltage controlled switches driving a pair of power relays, packaged inside a small, epoxy encapsulated enclosure. Each switch/relay combination (or channel) is independently programmable for turn on and turn off input voltages over a range of either 0-5 or 0-20 volts DC. Perfect for building thermostats, automatic battery disconnects, light level sensors, current-controlled switches, charge controllers, and humidistats. Backed by a full 1 year warranty.
- Ultra low battery drain
- Rugged reliable design
- Each channel can be used independently, or in combination with the other
- 10 amp latching relay outputs draws no power except when switching which drastically reduces power consumption
- Easy to program, simply press the Set Von and Set Voff buttons to memorize your desired turn on and turn off voltages
- 8-bit microcontroller / 10-bit ADC provides a resolution of 1024 increments for precise, repeatable control
- Non-volatile EEPROM memory stores your settings indefinitely, even without DC power applied
- Includes 1 thermistor which allows the unit to be used right out of the box as a thermostat
- Complete instructions offer example applications, operating instructions, trouble shooting tips, electrical/mechanical specifications and warranty info
LSL Products PVCS-DC Programmable Voltage Controlled Switch Dual Channel
Absolute Min. /Max. Supply Voltage: +7.5 / +22.0 VDC
Nominal Supply Voltage: +12.8 VDC
Typ. Current Consumption @ 12.8V: Both LEDs Off: 4.0 mA Typ. Both LEDs On: 4.5 mA Typ.
Von, Voff Input Measurement Range: 0 to 20.0 VDC or 0 to 5.0 VDC Input Measurement Resolution: 1024 increments (10 bits)
Input Resistance: 40 K Ohms Typ. (20 V input) 10 K Ohms Typ. (5 V input)
Default Turn-On / Turn-Off Voltage: 20.0/0.0 VDC (20 V input) 5.0/0.0 VDC (5 V input)
Regulated Reference Output Voltage: 5.0 VDC Typ.
Reference Max. Output Current: 50 mA
Reference Temperature Coefficient: -0.007% / °F. Typ.
Switch Response Time: 50 ms initial Typ. 250 ms sequential Typ. (measured between input and relay contacts)
Max. Relay Contact Current: 10 Amps Resistive @ 120/240VAC or 12VDC
Min. Relay Contact Current: 0 mA AC or DC
Relay Electrical Endurance: 300,000 Cycles Typ. (240VAC @ 10 Amps Applied)
Operating / Storage Temperature Range: +20 to +130° F / 0 to +140° F
Net Weight: 5.6 Ounces Typ.
NOTES: 1. All Voltages are POSITIVE with respect to POWER [-] (Terminal G). 2. All specs are valid 1 hour after applying DC power. 3. All electrical specs measured at 72° F. 4. Specs subject to change without notice.
|