Home > Jacks & Levelers > Stabilizing Jacks >

31861 Snaps Lite With 7/16" Pin
Barker 31861 Snaps Lite With 7/16" Pin
Barker 31861 Snaps Lite With 7/16" Pin


 
Price: $29.55
MFG P/N: 31861
MFG: Barker MFG
UPC #: 755220317284
SHIPS: 2


Quantity in Stock :

Availability: Out of Stock
Product Code: 15-0913
No Longer Available

Description
 
The Barker Snaps Lite with 7/16" pin allows you to set your 5th Wheel landing gear at the perfect height in seconds.  Snaps Lite are constructed from a high strength composite material making them stronger than the original all-steel Snaps. SNAPS LITE feature spring loaded pins that permit you to hook or unhook your 5th wheel trailer in less time. No longer do you have to kneel down in the mud, rain, and dirt to get the clevis pin in place on your landing gear. Snaps have eliminated the hard part of the job. Engage and disengage the heavy-duty steel pin with one hand. Snaps install in minutes with no tools required. The 7/16" pin diameter is designed for 1/2" diameter holes on 2-1/2" Square 5th Wheel Legs. Snaps Lite have a lifetime unconditional guarantee.  Includes (2) Snaps Lite.

Barker Snaps Lite With 7/16" Pin

Additional Product Information
The Barker Snaps Lite with 7/16" pin - #31861
  • Constructed from space-age composite
  • Strong as the original all-steel Snaps
  • Install in minutes... no tools required
  • Lifetime unconditional guarantee
INSTALLATION IS A SNAP!
1. Block tires so 5th Wheel cannot move either direction.
2. Hitch-up to truck so 5th Wheel legs are free of load.
3. Remove existing pin and place Snaps Lite around leg.
4. Pull plunger and position pin.
5. Permit spring to push pin through holes in both sides of leg.
6. Snap hinged brackets together and lock in place.
7. Repeat operation on other leg and remove RV from truck to put load on legs.
8. Test operation of Snaps Lite and you’re set to go!