Home > Fresh Water > De-Ionizing Systems >

On The Go OTG2-SDI Portable Mixed Bed Water Deionizer
On The Go Portable Mixed Bed Water Deionizer
On The Go Spotless Portable Mixed Bed Water Deionizer
  
Alternative Views:
: $245.95

MFG P/N: OTG2-SDI
MFG: On The Go
UPC #: 094922810236

SHIPS: In 1-2 Business Days
NOTE: Delivers in 2-5 Business Days

Quantity in Stock :10

Free Shipping
Availability: In Stock
Qty:

Description
 

Overview

The On The Go OTG2-SDI Portable Mixed Bed Water Deionizer produces mineral-free water that leaves no water spotting after rinsing a clean RV. Provides approx. 225 gallons of deionized water before recharging. Good for approx. 7 Class A RV rinses before recharging.

Features

  • Class A RV Rinses: approx. 7 rinses before recharging.
  • Car Rinses: approx. 45 rinses before recharging.
  • Gallons: approx. 225 gallons before recharging.
  • Features high-grade virgin mixed bed resin
    • Resin refills are available separately, see part OTG-SDI-1
  • TDS meter lets you know when to recharge the deionizer.
  • Easy and fast hook-up.
  • Standard hose connections.
  • No tools are required.
  • No need to dry after washing.
  • Includes a 1/4" cubic feet of high-grade virgin mixed bed resin, a high-flow shut-off valve, a 4 ft hose, cap and plug for travel plus an easy-to-read handheld TDS meter.

Specifications

  • Compact and lightweight, only 18 lbs.
  • Dimensions: 22" height x 6-3/4" diameter.
  • Tank Size: 0.25 cubic ft.
  • Flow Rate: Less than 2 gallons/minute for best performance & effectiveness
  • Weight: 18 lbs.
  • Limited 1-Year Manufacturer Warranty.
  • Made in the USA.

Instructions

  • See additional info section below.

On The Go Spotless Portable Mixed Bed Water Deionizer
Installation Instructions:

1. Install Hi-Flow shut-off valve to inlet side of tank (optional/if provided).
2. Connect water source to the inlet of the deionizer (if you have the Dual/Tri Bed DIs, connect the units together with the cam level coupler).
3. Make sure deionizer is standing upright for use.
4. Flush out system for 2-3 minutes (gets out all the resin dust).
5. Connect outlet to point of use.
6. Your new unit is ready for use!

Recharging Directions:

Step 1: When output water quality has exceeded pre-determined level, or when spotting occurs, DI water is no longer being produced. Shut off water supply and remove tank head.
Step 2: Empty resin into a waste container and rinse out tank. Dispose in accordance with federal, state, and local regulations.
Step 3: Return distributor tube into the tank and place rubber cap over top of tube. Place funnel into top of the tank.
Step 4: Slowly pour or scoop resin into tank. Shake or tap tank to get all of the resin bedded. Lastly, finish filling the unit with resin to within 2 inches of the top.
Step 5: Remove funnel and rubber cap. Replace tank head. Make sure all o-rings are properly seated. Ensure seating areas are free from foreign material. Apply silicone lubricant to surface of o-rings.
Step 6: Connect the water source to the inlet of the deionizer. Turn on the water and flush out the system for 2-3 minutes (gets out all of the resin dust). The unit will now produce deionized water.

ACCESSORIES
On The Go OTG-SDI-1 Mixed Bed Resin Deionizer Refill Kit
: $114.95

Add Free Shipping
On The Go Mixed Bed Resin Deionizer Refill Kit