Home > Jacks & Levelers > Tongue Jacks >

Flip 88-00-6525 Automatic 6" Jack Foot For 2" Jacks
Fastway Flip 88-00-6525 Automatic 6" Jack Foot For 2" Jacks
Fastway Flip 88-00-6525 Automatic 6" Jack Foot For 2" Jacks


 
Price: $28.26
MFG P/N: 88-00-6525
MFG: Fastway
UPC #: 856301002461


Quantity in Stock :

Availability: Out of Stock
Product Code: 94-7436
No Longer Available

Description Instructions
 
The Fastway 88-00-6525 Flip automatic jack foot gets rid of the hassle of placing blocks under your tongue jack.
  • Bolts quickly and easily to your existing jack
  • Giving you an automatic 6" extension that locks into place when extended, and folds up out of the way when retracted!
  • Fits 2" jacks (1 3/4" outside dimension inner jack tube); round or square, manual or electric.
  • Maximum 1,400 lb. tongue weight,
  • Maximum 3,000 lb. lift capacity.
  • Spacer ring and hardware included.
  • Limited 90-day manufacturer warranty

Fastway Flip 88-00-6525 Automatic 6" Jack Foot For 2" Jacks

Additional Product Information

Which Width?

whichwidth.jpg

The Flip jack foot come in two widths. One to fit a 2-1/4" jack, and one to fit a 2" jack. To find out what size jack you have measure the width of your jack above the trailer frame (as shown in the illustration to the right.) - A 2-1/4" Flip fits almost all standard tongue jacks (95+%). - A 2" Flip fits very small trailers and some electric tongue jacks.

Which Height?

whichheight.jpg

With the trailer hitched as you usually tow: - If there is 8" to 10" from the bottom of the outside jack tube to the ground use a 4" tall Flip jack foot. - If there is more than 10" from the bottom of the outside jack tube to the ground use a 6" tall Flip jack foot. General Rule Average height person with trailer coupled to tow vehicle: - If the top of your trailer frame sits above the bottom of your knee cap you probably need a 6" tall Flip jack foot. - If it sits below the bottom of your knee you probably need a 4" tall Flip jack foot.

The Flip jack foot attaches permanently to the bottom of your jack's inner tube. As you extend your jack, the Flip jack foot extends down, and locks into place. When you raise your jack, the Flip jack foot automatically tucks up under the frame and out of the way! The Fastway Flip automatic jack foot extends and retracts automatically!

Low Clearance Option

If you must drop the trailer in a place where there is not enough clearance below the jack, for the Flip automatic jack foot to pivot down properly, the jack may be extended with the jack foot in a horizontal position. A small block of wood placed directly under the inner jack tube will help keep the weight from bending the Flip automatic jack foot.