Home > Appliances > Air Conditioners >

Coleman Mach Heat Ready Ceiling Assembly, Lateral Ducted, Without Thermostat, White
Coleman Mach Heat Ready Ceiling Assembly, Lateral Ducted, Without Thermostat, White
Coleman Mach Heat Ready Ceiling Assembly, Lateral Ducted, Without Thermostat, White


 
Price: $162.07
MFG P/N: 8330D735
MFG: Coleman Mach
UPC #: 755790202386


Quantity in Stock :19


Availability: In Stock
Product Code: 61360
Qty:

Description Instructions
 
The Coleman Mach Heat Ready Ceiling Assembly, Lateral Ducted, Without Thermostat, White looks great with your Coleman Mach Air Conditioner. This assembly can only be used with lateral ducted RV air conditioners.
  • Great for use in updated RVs.
  • This is a heat ready ceiling assembly, the electric heat kit (62763) can be added to it.
  • Recommended Thermostat: 8530A3451
  • For use with Coleman Mach 8.
  • Important Note: This Product Ships by Ground Only.
Dimensional Diagram

Coleman Mach Heat Ready Ceiling Assembly, Lateral Ducted

Additional Product Information
This flush mount ceiling plenum is designed for application in systems that utilize field fabricated (OEM supplied) cold air ducting. The ducting must be routed through the ceiling cavity (between the interior ceiling and roof). Ducting specifications are given in the section labeled “Supply Ducting and Registers”.
This system utilizes a single, non-ducted centrally located return air opening. The return air opening is contained within the ceiling plenum. The ceiling plenum must be located directly below the roof opening used for mounting the roof top unit.
All manual controls have been removed from the ceiling plenum. They have been replaced with control relays. The relays are mounted in the electrical box of the ceiling plenum. The relays contain 12 VDC coils (which are energized by a wall mounted thermostat), with contacts that control the high voltage used to power the roof top unit.
All air conditioning functions are controlled by the low voltage wall mounted thermostat. The thermostat controls a 12 VDC electrical circuit which is used to energize the relays in the ceiling plenum. The thermostats that Airxcel, Inc. provides for the system are combination (Heat/Cool) thermostats. These thermostats are capable of operating both the roof top air conditioner and any furnace with a 12 VDC control circuit of 1 amp or less (continuous current). All air conditioning equipment is subject to freeze up when evaporator air flow is sufficiently reduced. Ducting of any length creates potential for reduced evaporator air flow and system freeze-up. To protect both the installer and Airxcel, Inc. from conditions that promote reduced air flow and system freeze-up, Airxcel, Inc. has equipped the ceiling plenum compressor control circuit with a low temperature probe. The low temperature probe monitors the temperature of the air conditioner evaporator coil. When the temperature of the evaporator coil drops below 28 degrees F, the switch will open, stopping compressor operation. Compressor operation will resume once the evaporator warms to 55 degrees F.