Home > Electronics > Seelevel Tank Monitoring System >

Garnet 709-BTP3 SeeLevel II Tank Monitoring System with Bluetooth
Garnet 709-BTP3 SeeLevel II Tank Monitoring System with Bluetooth
Garnet 709-BTP3 SeeLevel II Tank Monitoring System with Bluetooth


 
Alternative Views:


Price: $244.95
MFG P/N: 709-BTP3
MFG: Garnet Instruments


Quantity in Stock :14


Availability: In Stock
Product Code: 709-BTP3-1003
Qty:

Description Instructions
 
The Garnet 709-BTP3 SeeLevel II Tank Monitoring System with Bluetooth is one of our new models that includes Bluetooth® wireless technology. Designed for accurate level measurement of motorhomes and trailers with three holding tanks. This system monitors battery voltage, fresh, grey, and black water levels as well as the LPG tank. The level in percent is shown on a three-digit LED display. This model includes a 3-way pump switch with a connector that allows for more wiring options.
  • Bluetooth technology will allow you to read tank levels from a smartphone or tablet up to 30 ft. (9 meters) away.
  • App is available for any compatible Android and Apple iOS device.
  • System Requirements:
    • Android: An Android phone or tablet with Bluetooth® 4.1 running Android version 5.0 (Lollipop) or newer.
    • Apple iOS: An Apple iPhone, iPad or iPod touch running iOS version 11.3 or later.
  • Download the Garnet SeeLevel app in Google Play Store or Apple App Store
    • See manual for full instructions.
  • Monitors battery voltage, freshwater tank, grey water tank, and black water tanks
  • Provides percentage of full, accurate tank measurement readouts.
    • These readouts are accurate within 3/8 of an inch.
  • Tanks are monitored using Garnet’s proprietary external level sensing technology
    • This ends fouling problems caused by debris build-up in the holding tank
    • Detailed diagnostic information monitors sender operation
  • Measures tanks from 5" up to 34" depending on the sensors you specify
    • Grey and galley water tanks are limited to 12" Tall
  • Tank senders connect to display via a common bus network topology which saves wiring costs
  • Accessible tanks are easy to retrofit.
  • LPG tank connection compatible with existing electric senders
  • Calibrate LPG at first fill of tank or it can be factory calibrated.
  • Uses common industry connector for ease of installation and servicing
  • Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts
  • Accuracy: +/- 8% or better, limited by resolution and tank height and shape.
  • Temperature Range: +32 °F to +140 °F (0 °C to + 60 °C).
  • Current drain is less than 200mA
  • Panel Dimensions: 4" W x 2.8" H x 1" D
    • Required Cutout Size: 3" W x 1.8" H
  • Weight: 3 lbs.
  • Includes: (1) Display monitor, (3) 9″ 710-AR tank senders, (1) pigtail and mounting screws
  • Limited 1-year manufacturer warranty
  • See our SeeLevel Tank Monitor Comparison Guide to help you choose the right system for your RV.
If you already have a Garnet Seelevel II (see list of models below), you can upgrade to the Bluetooth model by just buying the BTP3 monitor only! All you will need to do is remove the pigtail and hardwire the Bluetooth monitor to your current system.
  • 709-2P, 709, 709-P3, 709-P3W or 709-HP3W.
  • Note: Replacing the HP3W model with the BTP3, you will lose the hot water tank switch.

Garnet 709-BTP3 SeeLevel II Tank Monitoring System with Bluetooth

Seelevel Bluetooth Monitoring System
Seelevel Tank Sensor Installation
Additional Product Information
Display Mounting Panel: Black panel, approximately 4" wide by 2.8" high by 1" thick (102mm wide X 71mm high X 25mm thick). Panel screws to the wall.

System Power Requirements: Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts. Current drain is less than 200mA.

Wiring: A single two-wire conductor required from the display to the senders. All the senders are wired in parallel. 12 V power and ground required for display. A separate two-wire conductor required from the display to the LPG sender.

LPG: Display will work with an LPG sender with a maximum resistance of 50 ohms to 500 ohms. Display shows increasing level as resistance increases. System must be calibrated with the LPG tank full.

Pump Switch: The pump switch is rated for a maximum of 7.5 amps. The use of a relay is required if more than 7.5 amps is needed. A 7.5 amp (max) fuse must be installed in series with the 12V power circuit to the switch!

ACCESSORIES
Garnet 709-gasket SeeLevel 709 Gasket Garnet 710SS SeeLevel II Sensor Board - 16" Garnet 709-filler SeeLevel 709 Filler Plate Garnet 709-BTP3 SeeLevel II Tank Monitor with Bluetooth - Monitor Only
Price: $7.20
Price: $49.95
Price: $7.25
Price: $99.99
Garnet 709-gasket SeeLevel 709 Gasket Garnet 710SS SeeLevel II Sensor Board - 16" Garnet 709-filler SeeLevel 709 Filler Plate Garnet 709-BTP3 SeeLevel II Tank Monitor with Bluetooth - Monitor Only