Home > Electrical > RV Converters >

Dynamics PD9105V Charge Wizard Controller
Progressive Dynamics PD9105V Charge Wizard Controller
Progressive Dynamics Charge Wizard Controller


 
Alternative Views:


Price: $41.90
MFG P/N: PD9105V
MFG: Progressive Dynamics
UPC #: 675566910515


Quantity in Stock :

Availability: Out of Stock
Product Code: 55-8807
No Longer Available

Description
 
Greatly extend your battery life with the Progressive Dynamics Charge Wizard Controller. This powerful microprocessor turns your Inteli-Power 9100 Converter into an intelligent and completely automatic 12V charging systems.
  • For use with lead-acid and not gel cell batteries.
  • Operates exclusively with Progressive Dynamics 9100 Series Inteli-Power Converters.
  • Constantly monitors your RV battery, then automatically adjusts the converter output voltage based on its charge status.
  • Features (4) operating modes: boost, normal, storage, and equalize.
    • Each Mode is automatically selected by the microprocessor and ensures a fast yet safe recharge for your RV battery.
  • Indicator Lights:
    • Light “on” at all times: indicates the Charge Wizard is in Boost Mode (converter output voltage set to 14.4 volts).
    • Light “blinks” on and off from once to many times per second: the Charge Wizard is in Normal Mode (converter output voltage set to 13.6 volts).
    • Light “blinks” on and off approx every 5 seconds: the Charge Wizard is in Storage Mode (converter output voltage set to 13.2 volts).
  • Weight: 0.16 lbs.
  • Limited 1-Year Manufacturer Warranty.

Progressive Dynamics Charge Wizard Controller

Additional Product Information
The Mode Select Switch:
The Charge Wizard functions are fully automatic however, you can test the Charge Wizard’s functions manually by pressing and holding the MODE SELECT SWITCH BUTTON DOWN. When the button is first pressed, the light will be “ON” all the time, indicating it is in the BOOST Mode (converter output 14.4 VDC). If you continue to hold the button, the unit will switch to the NORMAL Mode (converter output 13.6 VDC) and the light will blink from once to many times a second. If you continue to hold the button down the unit will go into the STORAGE Mode (converter output 13.2 VDC) and the light will blink approximately every five- (5) seconds. NOTE: No matter which mode you manually select, the Charge Wizard will automatically return to the NORMAL Mode of operation after 4 -hours.