The Lippert Brake Assembly is a right-hand electric brake assembly designed for easy replacement of your current worn out or failing trailer brakes.
- Fits most major brands including Dexter, Fayette, Hayes, Alko, Axletek, and Lippert.
- Designed for the right-hand side (passenger side) of your trailer with a 4000-7000 lb axle.
- Brake shoes and hardware are pre-assembled onto a new backing plate.
- Simply cut the electric wires, unbolt and remove the old backing plate, and bolt up the new backing plate.
- Brake wires, adjusting screw and spring are all included for installation.
- The brake has a 3.25" center hole diameter and a 5 hole bolt pattern.
- CSA certified.
- Manually adjustable.
- Weight: 16 lbs.
- Limited 1-Year Manufacturer Warranty.
Lippert Electric Brake Assembly - 12" x 2" - Right Hand - 4000-7000 Lb Axle
Road-tripping while pulling a trailer behind you
is an exciting experience. Being able to start up the engine and tugging all of
your belongings behind you to various destinations is truly an underrated
experience. However, there are several headaches that go along with this
situation.
Repairs and maintenance are just two of these
types of stress. You need to continually check to ensure that everything is
cooperating properly in order to dodge any unwanted accidents. For example, you
need to make sure the taillights and brake lights are connected to your
vehicles’. If they aren’t, you are far more likely to get into a disastrous
collision.
In order to be your safest on the road while
pulling a trailer, the trailer needs to be continuously monitored. Not only do
the lights need to be monitored, but as do the brakes. If you notice that your
brakes need maintenance, you’ll require the right
trailer brake assemblies and parts to get the job done.
Even if the brakes or trailer haven’t been used
much, the brakes can still be worn down quickly by heavy loads. Therefore, you
should keep your eyes peeled for the telltale signs that you need new brake
assemblies or parts on your trailer.
These signs include pulling, noise, squeaking,
pedal depression, or pulsing during braking.
Fortunately, we have a plethora of trailer brake assemblies and parts
available so you don’t have to always rely on a mechanic while on the road to
fix these issues in your trailer-- you can fix trailer brake issues yourself.
We have items including, but not limited to:
●
Right and left hand brake
assemblies
●
Trailer brake replacement shoe and
lining kits
●
Trailer brake spring and hardware
kits
●
Magnetic kits
●
Grease seals
●
Trailer hub covers
No matter what your brake needs are for your
trailer, we have you covered so that you can fix these problems and get back on
the road faster and easier.