Cross-frame stabilizing jacks for travel trailers and 5th wheels with mid-range frame clearance. 4,000 lb. static capacity each, 25" height. Combines leveling strength with stabilizing steadiness. Crank handle included. PowerPak-compatible. Set of 2.
The BAL 23225 is the middle model in the manual C-Jack series — the 25" size that sits at the heart of the lineup and covers the mid-range frame clearance found on a broad cross-section of travel trailers and 5th wheels. With 4,000 lbs. of static capacity per jack, it is a step up in both height and capacity from the 22" 23222, and a step down from the 28" 23228.
Like all C-Jacks, the 23225 is a cross-frame stabilizing system — each jack in the pair applies upward pressure to the trailer frame from opposite positions, combining leveling capability with multi-directional stabilizing to reduce bounce, rocking, and sway on a parked trailer. The 23225 ships as a boxed pair with a crank handle and is fully compatible with the BAL C-Jack accessory family including the 23200 foot pads, 23205 connecting channel, 23216 lock arm, and the 24210 PowerPak 12V motor kit for future upgrade to powered operation.
Center of the C-Jack lineup — covers the mid-range frame clearance common to a wide variety of travel trailers and 5th wheels
Cross-frame design applies upward leveling force while simultaneously reducing sway and bounce
Add the BAL 24210 PowerPak 12V motor kit anytime to upgrade to powered operation
Works with BAL 23216 Lock Arm for security and theft deterrence when parked
• 2x BAL 23225 C-Jack (25") • 1x Crank handle Compatible BAL Accessories (Sold Separately): • 23200 — C-Jack Foot Pads, set of 2 • 23205 — 42" Connecting Channel • 23216 — Lock Arm • 24210 — PowerPak 12V Motor Kit Individual replacement jack: • 23125 — Single 25" C-Jack (no handle, no hardware)
Measure your trailer's frame-to-ground clearance before ordering. The jack needs to fit in the retracted space and still extend firmly against the frame. The 25" sits at the mid-point of the C-Jack range. If you're between sizes, err toward the taller model — a jack that's slightly too tall can still be used with spacers or on slightly uneven ground, while one that's too short won't make contact with the frame.
The 23225 manual C-Jack is not a replacement for the BAL Powered C-Jack (21100005). If your RV currently has the powered model installed, you need the powered replacement — not this manual version.
All C-Jack models are sold as a set of 2 with a crank handle included. Measure your trailer's frame-to-ground clearance before selecting a size. All sizes accept the BAL 23200 foot pads, 23205 connecting channel, 23216 lock arm, and 24210 PowerPak motor kit.