Stop UV rays, weather, and ozone from cracking your RV sidewalls before your next trip. The ADCO Tyre Gard Triple Axle cover slips over three tires at once -- saving installation time and protecting your investment while the rig sits in storage or in the driveway.
Tire sidewall cracking is one of the most preventable -- and most overlooked -- forms of RV wear. Exposure to UV radiation, ozone, and moisture dries out rubber compounds and causes micro-cracks that grow into blowout risks. The ADCO Tyre Gard triple axle cover is designed specifically for triple-axle trailers and coaches where installing individual tire covers on six tires per side would eat up 20 minutes of your time every trip.
The 30-32" size fits a wide range of common RV and trailer tires. Check your sidewall for the overall diameter before ordering -- this cover is built for tires measuring between 30 and 32 inches in diameter.
Thick outer vinyl repels rain, road spray, and moisture to keep tire sidewalls dry during short-term and long-term storage.
Soft flannel lining diffuses and blocks UV rays -- the primary cause of premature sidewall cracking and ozone degradation.
Covers all three tires on one side of a triple-axle rig in a single installation. No juggling six separate covers per side.
Overlapping seams, double-needle stitching, and reinforced grommets resist wind lift and hold shape through repeated use.
UV radiation degrades rubber compounds even on overcast days. Ozone -- concentrated near motors, battery banks, and in urban air -- accelerates cracking at the molecular level. When a trailer sits for weeks or months, the sidewalls experience all of this with no ventilation or flexing to redistribute stress. A quality vinyl cover is the single most cost-effective step you can take to extend tire life and reduce roadside blowout risk.
The outer shell is heavy-duty vinyl selected for weather and UV resistance. The flannel backing prevents direct contact between the vinyl and the tire surface, reducing abrasion risk and adding an extra layer of UV filtration. Seams are double-needle stitched for strength, and the grommets are reinforced to hold up to wind stress without tearing free.