The AP Products Gas Spring replaces your old lift supports on your RV storage compartment doors, beds, trunk lids, rear hatches and more! This gas prop / dampener will give you excellent lift support, propping open your compartment door and keeping it open until you close it.
- Suspa P/N: C16-15645
- Extended length: 29.75"
- Compressed Length: 16.95"
- Stroke: 12.80"
- Force: 100 lbs
- Piston Rod Diameter: 0.236" (6 mm)
- Tube Diameter: 0.591 (15 mm)
- Attaches to a 13mm ball.
- Weight: 1 lb.
- Made in the USA.
- Limited 1 year manufacturer warranty.
AP Products Gas Spring 29.75" Length - 100 Lb Force
Installation Instructions:
Have someone hold the hatch, hood,
trunk, or rear window open while replacing
the lift support. Do not use a prop.
Before removing the old lift support,
examine any hardware provided to determine
which components must be reused.
The new lift support must be installed in
the same position as the one which was
removed. Do not scratch rod.
When installing the rod, the chamber
side must be placed upward while the
rod side is down.
Removable Ball Connectors:
Remove old lift support by prying off the
retaining ring, cap lock, or the security
lock ring.
Press new lift support onto ball stud and
properly install retainer.
|