Replacement magnesium anode rod for Atwood RV water heaters, attracting the corrosive elements that would otherwise attack your tank and significantly extending its service life.
The single most important factor in your RV water heater's tank life is the condition of its anode. The Aqua Pro 69719 magnesium anode rod attracts the elements that cause corrosion, protecting your tank from those elements rather than letting the tank itself take the damage. Installation is simple: just replace your existing MPT drain plug with this anode rod to start protecting your tank.
This rod features 18 percent more magnesium than standard anode rods, providing extended protection and significantly longer tank life. It's lead-free and includes a built-in drain plug, so there's no need for a separate one. It's sized specifically for Atwood water heaters using a 1/2" MPT drain fitting.
Attracts corrosive elements instead of the tank
Extended protection and longer tank life
Safe composition for RV water systems
Simple swap for your existing MPT drain plug
This rod is sized specifically for Atwood water heaters (4-1/2" length, 1/2" MPT thread) — it is not the same size as Aqua Pro's Suburban/Mor-Flo rod (9-1/2" length, 3/4" MPT thread). Confirm your water heater brand and drain fitting size before ordering. For best results, Aqua Pro recommends replacing your anode rod annually. California Prop 65 Notice: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
In The Package: • One (1) Magnesium Anode Rod