Skip the guesswork and the grinding. The B&W RVR2400 Quick Fit Custom Install Bracket is engineered to give your B&W Turnoverball gooseneck hitch a precise, vehicle-specific mounting position in your truck bed -- no cutting, no fabricating, no hunting for the right hole pattern. If you are installing or replacing the foundation hardware for a B&W Turnoverball setup, this is the bracket that makes the installation clean, repeatable, and rock-solid.
B&W Hitches built its reputation on the Turnoverball gooseneck hitch system -- a design that lets you flip the ball below the bed floor when it is not in use, leaving a flat, unobstructed truck bed. The system depends on a precisely located mounting bracket that ties into your truck frame at the correct geometry. The RVR2400 Quick Fit Custom Install Bracket is the vehicle-specific solution for select truck applications, providing the correct hole pattern, mounting height, and structural interface so your Turnoverball hitch sits exactly where it needs to.
Unlike generic or universal brackets that require shimming, drilling, or cutting to make work, the RVR2400 is designed to drop into a specific truck model's frame rail and bed structure. The result is a hitch installation that feels factory, not aftermarket.
Designed for precise alignment with select truck frame geometries -- no slotted guessing or custom fab required.
Solid steel bracket at 35.4 lbs provides the structural backbone needed for gooseneck towing loads.
B&W's Quick Fit design simplifies the installation process -- the bracket locates itself correctly so alignment is built in.
Works with B&W's Turnoverball gooseneck hitch family, the hitch system designed to disappear when you are not towing.
The B&W Turnoverball is one of the most popular in-bed gooseneck hitch designs on the market for good reason. The hitch ball mounts in a receiver hole cut through the truck bed floor. When you are not towing, the ball flips below the bed surface and a cover plate fills the hole -- leaving a flat, usable bed. When you need to tow, you flip the ball up, lock it, and hook up your gooseneck trailer or fifth wheel adapter.
The RVR2400 bracket is a core structural component of this system. It provides the mounting platform that anchors to your truck's frame and positions the hitch assembly at the correct location under the bed. Without the right bracket, the ball will not align with the bed hole and the system will not function safely.
The Quick Fit designation refers to B&W's bracket design philosophy: the bracket is pre-drilled and shaped to align with specific frame mounting points on the target vehicle. Installation typically involves:
Full hardware and instructions are included with the complete Turnoverball hitch kit. If you are purchasing the RVR2400 as a standalone replacement bracket, verify that your existing hitch hardware is compatible before ordering.
The B&W Turnoverball with the RVR2400 bracket is a gooseneck hitch system. It is designed for trailers with a gooseneck coupler -- a ball-and-socket coupling where the trailer's gooseneck tube drops down over a 2-5/16 inch ball mounted in the truck bed. This is the standard for livestock trailers, flatbed equipment trailers, and many large RV-style gooseneck trailers.
If you are towing a fifth wheel RV, you need a fifth wheel hitch, not a gooseneck hitch -- or a gooseneck-to-fifth-wheel adapter (such as B&W's own Companion series). The RVR2400 bracket supports the gooseneck ball assembly. Confirm your trailer's coupling type before purchasing.
B&W Hitches is manufactured in Humboldt, Kansas, and is one of the most trusted names in American-made towing products. Their Turnoverball gooseneck hitch line has been a go-to for ranchers, farmers, and heavy haulers for decades. B&W products are known for tight tolerances, robust steel fabrication, and fitment that actually works the first time.