The RVR2505 is the vehicle-specific mounting bracket set that transforms your truck bed into a ready-to-hitch platform for the B&W Companion RVR2500 5th wheel hitch. Engineered to use existing factory tie-down points or frame-side bolt locations in your specific truck, these rails install without drilling and give you the solid, repeatable foundation that the Companion quick-release system depends on.
B&W's Companion line is built around a two-part system: the hitch head (RVK3500 or the folding RVR2500 unit) and a set of vehicle-specific install rails. The RVR2505 Quick Fit bracket is that second piece -- the part that actually lives in your truck bed full-time and makes tool-free hitch removal possible.
Unlike universal under-bed rail kits that require measuring, cutting, and drilling, the RVR2505 is engineered for an exact bolt-pattern match to a specific truck model or model range. When you buy this bracket for your truck, the holes line up, the hardware goes in, and the rails sit level and tight without modification. That precision fit is what allows the Companion hitch head to drop in and lock in seconds -- and come back out just as fast when you need the truck bed for other use.
Uses factory frame or bed bolt locations specific to your truck. No drilling into the bed floor or frame rails required.
Solid steel rail and crossmember assembly rated to support the full capacity of the RVR2500 Companion hitch -- up to 20,000 lb GTW and 5,000 lb pin weight when paired correctly.
Machined receiver channels match the RVR2500 and RVK3500 Companion hitch head mounting feet for tool-free install and removal in under 90 seconds.
Low-profile design keeps the rails below bed rail height so you can use a bed cover or cargo without the bracket getting in the way between towing trips.
The Companion system separates the install rails from the hitch head. You mount the RVR2505 bracket once -- it stays in the truck. The RVR2500 Companion hitch head drops onto the bracket's four receiver points and locks with a single handle motion. No tools. No bolts to thread. When you unhitch the trailer, you can pull the hitch head out of the bed in about a minute and drive away with a flat, open bed.
This approach is what makes B&W's Companion one of the most popular hitch systems for full-timers and frequent towers who also use their truck as a daily driver. The RVR2505 bracket is the piece that makes that convenience possible -- without it, the quick-release feature of the RVR2500 head doesn't exist.
The "Custom Install" designation in the product name means this bracket is engineered for a specific truck application -- not a generic one-size-fits-all rail set. B&W produces multiple bracket SKUs under the RVR25xx numbering scheme, each matched to a different truck make, model, and cab/bed configuration. The RVR2505 specifically fits the truck models B&W has designated for this part number.
Common truck platforms supported across the B&W Quick Fit bracket family include:
To confirm this specific SKU (RVR2505) fits your truck year, make, model, and bed length, use B&W's online fitment guide at turnoverball.com or contact their support line. Installing the wrong bracket SKU will cause misalignment of the hitch head receiver points.
Installation of the RVR2505 is a one-time job, typically completed in 1-2 hours with basic hand tools. General process:
All required mounting hardware for the truck-side installation is included with the RVR2505 bracket. The Companion hitch head (RVR2500) is sold separately.