Get your B&W Turnoverball gooseneck hitch installed the right way -- with a truck-specific bracket engineered to fit your bed frame without compromising the factory floor. The RVR2602 Quick Fit bracket eliminates guesswork and generic adapter hassles, giving you a solid, repeatable mount that works with B&W's industry-leading Turnoverball hitch system.
B&W Hitches built its reputation on the Turnoverball gooseneck hitch system -- a design that lets you remove the ball and cover the hole for a clean, flat truck bed when you're not towing. The RVR2602 is the vehicle-specific install bracket that makes that system work properly in select truck applications. Rather than relying on a universal mounting approach that can flex, shift, or require field modifications, this bracket is engineered to the exact frame geometry of a specific truck model.
At 26.74 lbs, the RVR2602 is a substantial, all-steel bracket -- not a lightweight adapter. It's built to transfer towing loads directly to the truck frame, which is exactly where those forces need to go when you're pulling a heavy fifth-wheel-style gooseneck trailer.
Engineered to match the frame geometry of select truck models, so the bracket aligns to existing mounting points without cutting or drilling the bed floor.
Solid steel build at 26.74 lbs transfers gooseneck towing loads directly to the truck frame for maximum stability and rated capacity.
B&W's Quick Fit bracket system is designed to reduce install time compared to universal-fit alternatives, with pre-positioned mounting provisions.
Works as part of the B&W Turnoverball ecosystem -- the removable ball design keeps your bed flat and usable when the hitch is not in use.
The B&W Turnoverball is widely regarded as one of the cleanest gooseneck hitch designs available for trucks. The ball is mounted in a housing that sits flush with the truck bed. When you're not towing, the ball flips down below the bed surface and a cover plate fills the opening -- leaving you with a completely flat, usable bed floor. No protruding ball to trip over or damage cargo.
The system has two main components: the underbed mounting structure (which includes rails, crossmembers, and brackets like the RVR2602) and the above-bed receiver/ball assembly. The RVR2602 is a custom install bracket -- a vehicle-specific piece that adapts the B&W underbed rail system to the exact frame configuration of a particular truck. This is not a universal part; it's designed for a specific application within the B&W fitment guide.
Gooseneck setups see tremendous tongue weight -- often 2,000 lbs or more on heavy trailer combinations. A bracket that doesn't align perfectly with the truck frame creates stress concentrations and can flex under load. B&W's vehicle-specific brackets eliminate that risk by using existing, engineered frame mounting points.
B&W produces Turnoverball hitch kits for a wide range of trucks, each with a part number specific to the vehicle year, make, and model. The complete hitch kit (sold separately) includes the main rail assembly, the Turnoverball receiver, and any required vehicle-specific brackets. The RVR2602 is one of those vehicle-specific brackets -- it is typically sold as a standalone component for installations that require a second bracket position, a replacement, or a specific frame-mounting adaptation not included in the base kit.
If you are building out a complete Turnoverball installation, verify that the RVR2602 is the correct bracket for your specific truck by cross-referencing the B&W fitment guide for your year, make, and model before ordering.
The RVR2602 is a custom-fit bracket, not a universal part. B&W publishes a detailed fitment guide on their website that lists which brackets, rails, and assemblies are required for each supported truck. Match your truck's year, make, model, and bed length to confirm this part number applies to your installation.
B&W Quick Fit brackets are designed to work with existing truck frame holes or factory-provided mounting locations, minimizing or eliminating the need to drill through the bed floor. Installation generally involves:
For most supported trucks, B&W estimates installation time at approximately 1 to 2 hours with basic hand tools. The bracket itself does not require welding.
B&W Trailer Hitches is an American manufacturer based in Humboldt, Kansas, producing fifth-wheel hitches, gooseneck hitches, and towing accessories. The Turnoverball gooseneck system has been one of their flagship products for decades and is well-regarded in the RV, agricultural, and commercial hauling communities for its clean installation and high weight ratings. B&W manufactures their products in the USA.