Custom anti-skid TPO cargo mat with ½" polypropylene foam backing. Fits both 118" and 136" wheelbases — 118" WB requires trimming. 100% waterproof. Assembled in Tennessee.
The BedRug VanTred VTDP14M brings heavy-duty TPO protection to the Ram ProMaster 1500, 2500, and 3500 with the 118" or 136" wheelbase. Unlike the soft polypropylene fiber surface of the VanRug, the VanTred's durable thermoplastic polyolefin top layer is purpose-built for rugged work environments — providing an aggressive anti-skid texture that grips tools and cargo, resists chemical exposure, and cushions impacts to protect the ProMaster's factory-painted cargo floor from the daily demands of trade and delivery use.
The mat is sized for the 136" wheelbase ProMaster floor and also fits the 118" wheelbase with trimming. The ½" polypropylene foam backer cushions knees during work, absorbs impact, reduces road noise, and insulates against heat — making the ProMaster's cargo area more comfortable and practical on every job.
Textured thermoplastic polyolefin construction grips tools and cargo firmly during transit and provides safe, stable footing in the cargo area
Non-porous TPO surface and polypropylene foam backer resist all moisture absorption, preventing mold and mildew in wet work environments
Fits both 118" and 136" WB ProMaster models — drops in on the 136" WB; requires trimming for the 118" WB fitment
Assembled in Tennessee and backed by a limited lifetime warranty for the duration of the original owner's vehicle ownership
This mat is cut to fit the 136" wheelbase ProMaster floor. If your van has the 118" wheelbase, trimming is required to achieve a proper fit. 136" WB: Drop-in installation — no trimming needed 118" WB: Requires trimming to the shorter floor length before installation Use a straight edge and sharp utility knife or scissors to trim the mat. The TPO material cuts cleanly and the edges will not fray. Refer to the installation instructions included in the box for guidance on the correct trim length for the 118" wheelbase.
In the Box: • VTDP14M VanTred Cargo Mat (128⅝" × 69⅜") • No additional hardware needed • Note: Does NOT include plastic trim piece 136" WB — Drop-In Installation (approx. 5–10 minutes): 1. Sweep out cargo area to remove debris 2. Unroll and position mat over the cargo floor 3. Slide edges under plastic OEM shrouds at the rear door and side entry door to secure in place 118" WB — Trim-to-Fit Installation: 1. Measure your cargo floor length 2. Mark and trim the mat to the correct length per installation instructions 3. Drop in and secure under OEM shrouds as above Cleaning: Brush, vacuum, or hose off. Power-washer safe. TPO will not absorb liquids or trap odors — rinse and allow to dry.
The VanTred's TPO surface handles demanding commercial van environments. Confirmed resistance includes: ✓ Gasoline & Motor Oil ✓ Bleach & Cleaning Chemicals ✓ Battery Acid ✓ Water & Moisture (100% Waterproof) ✓ Mold & Mildew TPO's high-density, non-porous construction prevents chemical absorption and surface degradation. Unlike the polypropylene fiber VanRug, the VanTred's solid TPO surface is the superior choice when tools, equipment, and chemical exposure are part of the daily routine.
BedRug, Inc. warrants the VanTred to be free from defects in materials and workmanship for the duration of vehicle ownership by the original purchaser (limited lifetime warranty). Warranty Notes: • Proof of purchase required for warranty service • Customer modifications may void warranty • Labor and shipping not covered • Product must be cleaned before any return • Terms may vary by state Warranty Service Contact: BedRug, Inc. Customer Service Phone: 800-462-8435
Confirm your ProMaster's wheelbase from the door jamb sticker or registration before ordering. The 118" and 136" wheelbases share this part number — the 136" WB is a drop-in fit while the 118" WB requires trimming. For the 159" regular or extended wheelbase, see the separate VTDP14L and VTDP14LX part numbers. For a carpet-like surface on the same 118"/136" WB fitment, see the VanRug VRDP14M.