Curt 22325 Anti-Rattle Trailer Hitch Clamp For 2" Receiver

Step 1 – Position the clamp on the shank
Slide the anti-rattle clamp over the shank of your hitch accessory. Make sure you’re using the correct clamp size for your 2-inch receiver.

Step 2 – Insert shank and align clamp
Insert the shank into your vehicle’s 2-inch hitch receiver and secure it with a properly sized hitch pin. Position the U-bolt under the receiver lip with the clamp base resting on the shank.

Step 3 – Tighten the lever
Push down the locking lever to tighten the clamp against the hitch connection.

• If it feels loose, open the lever and turn the adjustment nut to increase tension

• No tools required for installation or adjustment

WARNING: This product can expose you to one or more chemicals known to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov