Home > Fresh Water > Hose Fittings & Regulators >

Camco 22703 RV Flexible Hose Protector with Easy Gripper -- 5 Inch, Brass Fittings, NSF/ANSI 372

Camco 22703 RV Flexible Hose Protector with Easy Gripper, 5-inch coiled anti-kink protector with brass fittings and FDA-approved materials
Camco RV Flexible Hose Protector With Easy Gripper
 
Alternative Views:


List Price: $12.99
: $7.20
You save $5.79!
Part Number: 22703
Manufacturer: Camco

Quantity in Stock :39

Availability: In Stock
Qty:

 
CamcoNSF/ANSI 372 CertifiedFDA-Approved MaterialsCamco 22703 RV Flexible Hose Protector with Easy Gripper

Stop hose crimping at the source. The Camco 22703 installs as a coiled spacer between your RV faucet or water hookup and your drinking water hose, letting the hose exit at any angle without kinking, cutting off flow, or wearing prematurely at the connection point.

End Hose Crimping at the Faucet -- Without Tools or Hassle

One of the most common causes of reduced water pressure at an RV campsite hookup is a kinked hose right at the spigot or inlet. When a stiff hose is forced to bend sharply against a pedestal or the side of an RV, it collapses internally and restricts flow. The Camco 22703 fixes this with a simple, durable coiled protector that acts as a flexible buffer between the hard connection and the hose body.

The built-in Easy Gripper gives you a secure, non-slip surface to thread the fitting by hand -- no pliers needed, no skinned knuckles. The coiled spring-style body lets the hose exit at virtually any angle while the protector absorbs the bend stress before it can reach the hose wall.

Coiled Anti-Crimp Design

Spring-coil body lets your hose flex and run at any angle from the connection without collapsing the inner diameter or restricting water flow.

Easy Gripper Attachment

Textured grip surface allows effortless hand-tightening without tools, making hookup and breakdown fast at every campsite.

Brass Fittings

Solid brass threaded fittings resist corrosion and provide a leak-free seal at both the spigot and hose ends. Low-lead compliant per NSF/ANSI 372.

Drinking Water Safe

Flexible body made with FDA-approved materials. CSA-certified to NSF/ANSI 372 for low lead content -- safe for potable water systems.

Protects Your Hose Investment

Constant bending at the connection point is the number one cause of early hose failure. The 22703 absorbs that stress so your white drinking water hose lasts longer and stays kink-free through seasons of use.

Where to Install It

Thread the protector directly onto the campground water pedestal spigot, your RV's city water inlet, or any outdoor faucet. Then attach your standard 5/8-inch garden-style drinking water hose to the other end. The coiled section hangs between the two, handling all bends and angles automatically.

Maintenance Tips
  • Flush the protector with clean water at the end of each season before storage.
  • Inspect the coiled body for cracks or UV damage annually -- replace if the flexible section shows stiffening or splits.
  • Hand-tighten only -- overtightening brass fittings can crack the flexible collar.
  • Store indoors or in a hose bag to extend UV life of the flexible material.
Pairs Well With

Use the Camco 22703 alongside a Camco TastePURE drinking water hose and a Camco Flexible Hose Elbow (Camco 22505) when you need both kink protection and a 90-degree turn at a tight-clearance hookup. Adding a pressure regulator upstream protects both your hose and your RV's plumbing from campground pressure spikes.

Product Specifications

ManufacturerCamco
Manufacturer Part Number22703
SKU88-9398
UPC014717227032

Physical Dimensions

Overall Length5 inches
Internal Diameter1/2 inch
Body StyleCoiled / spring protector
QuantitySold individually

Fittings and Materials

Fitting MaterialBrass
Thread Type3/4 inch GHT (garden hose thread), standard RV/potable water
Flexible Body MaterialFDA-approved flexible polymer
Lead ComplianceCompliant with all federal and state low-lead laws

Certifications and Standards

Potable Water SafetyFDA-approved materials
Lead Content CertificationCSA certified to NSF/ANSI 372 (Low Lead Content)
WarrantyLimited 1-year manufacturer warranty

Compatibility

Compatible Hose TypeStandard 3/4 in. GHT drinking water hoses (most white RV water hoses)
Typical Install PointsCampground water pedestal spigots, RV city water inlet, outdoor faucets
Important Information
  • This protector is sold individually -- one unit per package.
  • Hand-tighten only. Do not use pliers or a wrench on the flexible collar -- over-torquing can crack the body at the fitting junction.
  • Designed for standard campground water pressure (typically 40-80 PSI with a regulator in line). Always use a pressure regulator upstream to protect this fitting and your RV plumbing.
  • Intended for potable (drinking) water use only. Do not use with chemical hoses or drain connections.
  • Inspect the coiled flexible section before each use. Discard and replace if cracks, brittleness, or deformation are visible.
  • Not designed for high-pressure applications beyond typical residential/campground water supply.

ACCESSORIES
Apex Neverkink Water Hose 50' - 5/8" Teknor Apex NeverKink RV/Marine Fresh Water Hose, 25' x 5/8" ID
: $39.99

Add
: $26.49

Add
Apex Neverkink Water Hose 50' - 5/8" Teknor Apex 8602-25 NeverKink RV/Marine Fresh Water Hose, 25' x 5/8" ID


Browse for more RV Accessories in the same category as this item:

Fresh Water > Hose Fittings & Regulators
Fresh Water
Camco