Keep your sewer hose elevated at the right angle every time you dump. The Camco 40351 accordion-style aluminum support extends to a full 6 feet, holds your hose firmly over flat or uneven terrain, and collapses to just 6 inches when you break camp -- no tools, no assembly, no fuss.
A sewer hose lying flat on the ground is an invitation for slow drains, backflow, and messy spills. The Camco 40351 lifts and angles your hose continuously from the RV's sewer outlet down to the campground dump station connection, letting gravity do all the work. The accordion design adjusts to match the actual terrain beneath it -- slight rises, gravel, roots, paving seams -- without any repositioning.
Built entirely from extruded aluminum with solid brass rivets, the 40351 resists rust and corrosion across many seasons of use. There are no plastic hinges to crack in cold weather and no steel components to oxidize at the joints. The unit ships fully assembled and ready to deploy right out of the package.
Extends to 72 inches -- enough coverage to bridge most campsite pad-to-pedestal distances at a proper downward slope.
Collapses to just 6 inches long. Fits inside a standard sewer hose storage tube or flat in a basement compartment.
Extruded aluminum frame with solid brass rivets. Rust-resistant and lightweight -- weighs well under 2 lbs fully extended.
Ready to use out of the box. Setup and takedown each take seconds -- open it, place it, done.
Campground surfaces are rarely level or smooth. The accordion sections of the 40351 flex slightly at each joint, allowing the support to conform to gravel, asphalt, grass, and uneven pads without tipping or rocking. This keeps the hose in contact with the support along its full length rather than bridging over dips and creating low spots where waste can pool.
There are no legs to unfold, no clips to engage, and no separate pieces to lose. Pull the two ends apart to expand -- the accordion links lock open under tension. Lay your sewer hose into the cradle and you are ready. At breakdown, remove the hose, push the ends together, and store. The whole operation takes less than 30 seconds in either direction, which matters at the end of a camping day when you just want to get rolling.
Camco backs the 40351 with a limited lifetime manufacturer warranty. The all-aluminum and brass construction means there are very few failure points -- no springs, no plastic latches, no moving parts beyond the riveted accordion joints. With reasonable care and rinsing after each use, this support should outlast multiple sewer hoses.