When your RV's 50 amp shore power receptacle is damaged, cracked, or burned, this Camco Power Grip replacement gets you back to full power without replacing the entire cord. The patented pull handle makes connecting and disconnecting safer and easier, even in tight pedestal bays or low-light campgrounds.
The Camco 55353 is a NEMA 14-50P female receptacle designed specifically for RV shore power cords rated at 50 amps. If you're running a large Class A, fifth wheel, or any rig with dual air conditioners on a 50 amp service, a cracked or corroded receptacle is a safety hazard -- this part restores a solid, code-compliant connection.
Wiring is straightforward: the receptacle accepts #4 through #10 gauge wire and includes detailed installation instructions. Most RV owners with basic electrical experience can complete the swap in under an hour. The bright yellow molded poly case doubles as a high-visibility indicator in dim campsite conditions.
The Power Grip handle gives you a firm grip for safe plug and unplug -- no more awkward hand positions near live connections.
Accepts #4 through #10 gauge wire, covering the full range of standard 50 amp RV shore power cord builds.
Bright yellow molded polypropylene body resists UV, moisture, and impact -- holds up in outdoor campground use season after season.
Rated at 125/250V and 50 amps for 12,500 watts -- handles the full load of dual AC units, water heater, and other high-draw appliances simultaneously.
This receptacle replaces the female end of a standard 50 amp RV power cord -- the end that connects to the campground pedestal or generator outlet. It is not the male plug that attaches to the RV's inlet. If your existing female connector is discolored, cracked, has loose contacts, or shows signs of arcing, replace it before the next trip rather than risk a power failure or fire hazard at the connection point.
The NEMA 14-50P standard is the same configuration found at the vast majority of full-hookup RV campgrounds across North America. This receptacle will mate correctly with any NEMA 14-50R pedestal outlet. It is not compatible with 30 amp (TT-30) or 15/20 amp pedestals without an appropriate adapter (sold separately).