Stop burning propane every time you need hot water at a campground with electric hookups. The Camco 11673 Hybrid Heater drops into your existing 6-gallon LP gas RV water heater tank and lets you switch to 120V AC power on demand -- no plumbing changes, no new tank, no propane required when shore power is available.
Most stock RV water heaters -- Suburban, Atwood/Dometic, and similar -- run on propane only. That works fine off-grid, but it burns through your LP supply fast when you are parked at a full-hookup site. The Camco Hybrid Heater gives you the best of both worlds: keep your LP burner intact for boondocking and dry camping, then flip to electric when you are plugged in.
Installation replaces the LP gas anode rod port with a stainless steel electric heating cartridge. The included on/off switch, thermostat, power cord, and wiring harness provide a complete ready-to-install package. No special tools beyond a socket wrench are required for most installations.
Corrosion-resistant stainless steel cartridge rated for continuous immersion in the RV tank environment. Resists scale and mineral buildup better than bare copper elements.
Field-adjustable from 90 to 150 deg F. Factory preset at 120 deg F -- a safe, energy-efficient default for most RV households.
Comes with on/off power switch and mounting bracket, thermostat, 120V power cord, and wire assemblies. No hunting for additional parts.
At 425W / 1,450 BTU, this element draws less than 4 amps -- well within any 15A or 20A shore power circuit. Your LP supply stays reserved for cooking and heating.
This unit is designed to fit 6-gallon LP gas RV water heater tanks that use a standard anode rod port as the element access point. Common compatible tanks include Suburban and Atwood/Dometic 6-gallon models. Always confirm your tank has an accessible threaded port of the correct size before ordering.
Installation is straightforward for an RV owner comfortable with basic electrical work. The cartridge threads into the tank port, the thermostat mounts nearby, and the switch bracket installs in a convenient location inside the water heater compartment door or adjacent panel.