Wind is the number-one enemy of RV awning fabric. The Carefree of Colorado 902801 Awning Fabric Clamps permanently mount to the underside of your flat-arm patio awning rail and grip the canopy edge with a soft rubber bite -- eliminating the snap, flap, and stress that shortens fabric life. Sold as a set of 2 in black, with all mounting hardware included.
Awning fabric that flaps repeatedly in the wind doesn't just make noise -- it fatigues the material at the hem and seams, leading to fraying, cracking, and eventually tears. The 902801 clamps clamp down on that movement by holding the canopy edge firmly to the awning arm, so the fabric tension stays even instead of snapping back and forth with every gust.
Because they mount permanently to the awning arm, these clamps are always in position when you roll out -- no fumbling with bungee cords or removable wind stabilizers that get left in a bin somewhere. They are especially useful for full-timers parked in exposed sites, coastal campers dealing with sea breeze, and desert RVers where afternoon thermals can turn a calm morning into a 30-mph gust fest by midday.
Bolts directly to the awning arm -- always in place, nothing to lose or forget.
Rubber-lined jaws cushion the fabric edge -- no abrasion, no marks on the canopy material.
Each set includes 2 clamps, 2 mounting screws, and 2 washers -- ready to install out of the box.
Carefree of Colorado manufactures these clamps domestically to the same quality standard as their OEM awning hardware.
The 902801 clamps are designed specifically for patio awnings with straight (flat) support arms. They are compatible with the following awning brands and series:
Installation is a straightforward DIY job requiring no special tools. The clamp body mounts to the underside of the awning arm rail using the included screw and washer. Once the clamp is positioned at the fabric hem, it grips the canopy edge and holds it in place. No ongoing adjustment is needed after initial install.