Give your rig a fresh look and reliable shade with a direct replacement awning fabric from Carefree of Colorado. The JU208D00 is a 13.5 oz vinyl canopy in the classic Black/Gray Dune Stripe pattern, sized for 20 ft awning systems. The integrated White Weatherguard protects the rolled fabric from UV exposure, road grime, and scrapes every mile you travel.
The JU208D00 combines the main canopy and valance into a single, seamless piece of 13.5 oz vinyl fabric. That means no separate valance to align, no mismatched patterns -- just a clean, uniform appearance when the awning is fully extended. The double-sided Dune Stripe pattern looks sharp from inside and outside the campsite.
Two polyrods secure the fabric to the roller tube by seating in two separate slots -- no extra hardware, no improvised fixes. The standard poly cord sizing and single-hemmed edge with traditional fabric thread keep installation straightforward for a DIY replacement job.
White Weatherguard wraps the fabric when rolled up, blocking UV rays, road debris, and moisture that degrade unprotected vinyl over time.
Heavier than economy-grade fabrics, 13.5 oz vinyl resists tears, holds color longer, and stands up to wind and rain through multiple seasons.
Black/Gray Dune Stripe is printed on both faces, so the fabric looks finished whether you are looking up from the patio or down from a hillside.
Works with most A&E, Carter, Carefree, Dometic, Faulkner, and Norseman roller awning systems that accept standard polyrod attachment.
Replacement awning fabric is intentionally cut shorter than the awning's nominal width. The JU208D00 measures 19 ft 2 in in length and is designed for 20 ft awning systems. The fabric sits approximately 5 inches inboard of each arm, for a combined 10-inch reduction versus the full awning span. This is normal and by design -- it prevents the fabric edges from dragging on the arms and allows proper polyrod seating.
The kit includes everything needed to get started: one replacement fabric panel, one spline tool, and printed installation instructions. The two polyrods feed into dedicated slots in the roller tube -- no drilling, no adhesives. Single-hemmed edges with traditional fabric thread hold their shape through rolling and unrolling cycles.
This fabric is designed for roller-style awnings that use the standard polyrod-in-slot attachment method. Confirmed compatible brands include:
If your current awning uses a screw-on or staple-attached fabric edge rather than a polyrod slot, verify your roller tube style before ordering.