Keep your Travel'R patio awning rolling smoothly with this direct-replacement idler head assembly from Carefree of Colorado. The left-side idler head guides and supports the awning fabric during extension and retraction, maintaining proper alignment and consistent tension across the roller tube. A worn or damaged idler head causes uneven fabric travel, binding, and accelerated wear -- this OEM-style replacement restores correct function and protects your fabric investment.
The Travel'R is one of Carefree of Colorado's most popular entry-level manual patio awning systems. Over time, the idler head bearing and roller can wear, corrode, or crack due to UV exposure and repeated cycling. Part number R001327WHT is the factory-correct left-side replacement, designed to drop into the existing mounting location without modification.
"Left side" is determined by standing outside your RV facing the entry door -- the left idler head is the one to your left, opposite the drive/rafter arm side. Confirm your side before ordering; the left and right assemblies are not interchangeable.
The roller and bearing minimize friction against the awning fabric during every open and close cycle, extending the life of the fabric and the roller tube.
Comes as a ready-to-install unit including the bracket, roller, and bearing -- no hunting for individual components.
Color-matched white finish blends with standard white Travel'R awning hardware. Also available in black (part R001327BLK, SKU 94-9678) for black-hardware models.
Manufactured by Carefree of Colorado at their U.S. facility, ensuring OEM-level quality and fitment for Travel'R awning systems.
This assembly is designed specifically for the Carefree of Colorado Travel'R manual patio awning system. It replaces the left-side idler head on Travel'R units and is not designed for Carefree's Spirit, Fiesta, Pioneer, or other awning families, which use different idler and drive arm configurations.
Installation is a straightforward bracket swap on most Travel'R awnings. You will need to de-tension the awning, remove the roller tube, and extract the existing idler head from the end of the tube before installing the replacement. Refer to your Travel'R awning documentation or Carefree's support resources for model-specific disassembly steps.