Latitude Awning Motion Detection Retractor Sensor / Control Module
Restore your Carefree Latitude awning's automatic wind-sensing retraction with this direct-replacement sensor and control module. When the electronics fail, your awning loses its ability to detect motion and retract safely -- this is the OEM-matched board that brings it back.
The Carefree Latitude awning's automatic retraction system depends on a working motion detection sensor and control module. When that module fails, the awning loses its ability to sense wind movement and retract on its own -- leaving your awning vulnerable to wind damage during unexpected gusts. Part number R060686-003 is the Carefree OEM-matched replacement that restores full automatic operation.
This is a targeted fix for a specific failure point. If your Latitude awning motor and arms are mechanically sound but the automatic retraction feature has stopped responding, this sensor/control module is the component to replace. It handles motion detection input and triggers the retract signal to the awning drive system.
Senses awning movement caused by wind and triggers automatic retraction to protect the awning fabric and arms.
Carefree part R060686-003 -- a direct match for the original module used in Latitude series awnings.
Integrates sensor input with the awning control circuit to deliver the retract command to the drive motor.
Designed specifically for the Carefree Latitude electric awning platform used on many RV makes and models.
The motion detection retractor sensor is a wear item on electric awnings. Exposure to heat, UV, moisture intrusion, and electrical surges can all degrade the control board over time. Common symptoms of a failed module include:
Carefree Latitude awnings use an accelerometer-based or motion-sensing circuit mounted to the awning structure. When wind causes the awning to move beyond a set threshold, the sensor signals the control module, which in turn commands the drive motor to retract. This R060686-003 board is the interface between that sensor input and the motor command output. Replacing it restores the complete signal path when the board itself is the failure point.
This module is designed for the Carefree Latitude electric awning series. Carefree produces multiple awning lines (Pioneer, Travelstar, Freedom, Altitude) with different control electronics -- not all modules are interchangeable. Cross-reference your existing module's part number or your awning's serial tag before ordering. If your existing board carries part number R060686-003 or a direct predecessor, this is your replacement.