Keep your onboard propane supply protected from the elements with this dedicated dual 20 lb tank cover from Classic Accessories. Built to handle outdoor exposure, it blocks UV rays, repels moisture, and resists mildew -- all while giving you a clean, finished look at your tongue or storage compartment.
Exposed propane tanks take a beating from sun, rain, road grime, and seasonal weather. Classic Accessories designed the 06-0607 specifically for the paired 20 lb (5-gallon) cylinders found on most travel trailers, fifth wheels, and toy haulers. The tight-fitting cover shields valve fittings, hose connections, and tank bodies from UV degradation, moisture intrusion, and debris accumulation between trips.
The front-panel zipper runs the full height of the cover, making it easy to access the tank valves, swap cylinders, or check gauge levels without pulling the cover off entirely. When you are done, the zipper seals back up quickly -- no straps to thread, no buckles to fumble with.
Sealed seams and weather-resistant fabric keep rain and road splash from reaching your tanks and fittings.
Treated fabric resists UV breakdown and mildew growth -- important for rigs stored outdoors or in humid climates.
Front zipper opens the entire face of the cover so you can reach valves and swap cylinders without removing the cover.
Sized specifically for two standard 20 lb (5-gallon) propane cylinders sitting side by side on a standard tongue bracket.
The 06-0607 is designed for the standard dual-tank propane setup common on travel trailers and fifth wheels -- two 20 lb DOT cylinders mounted side by side on a tongue bracket or A-frame storage rack. It is also a practical choice for stationary setups like deck grills, generator hookups, or backup fuel storage where tanks sit exposed to the elements year-round.
Classic Accessories backs this cover with a limited 3-year manufacturer warranty against defects in materials and workmanship. The brand has produced RV and outdoor protective covers since the 1980s and is a widely stocked name at RV dealers and camping retailers across North America.
No tools required. Slide the cover over your paired 20 lb cylinders while they are mounted in their bracket. The cover is designed to fit snugly around the base and top of the tank pair. Once positioned, zip the front panel closed. Some installations may benefit from a bungee or tie-down cord at the base if the rig is regularly driven in high-wind corridors, though the snug fit typically holds without additional hardware under normal towing conditions.