The factory-matched replacement outer shroud for Coleman Mach and RVP 7000, 8000, and 4800 series rooftop air conditioners. When UV exposure, road debris, or storm damage cracks or fades your existing shroud, this direct bolt-on replacement restores weatherproofing and appearance without cutting, drilling, or modification.
The outer shroud is the first line of defense for your rooftop AC -- it channels airflow over the condenser coil, protects internal components from rain and road debris, and takes the full brunt of sun, hail, and tree branches. After years of UV exposure or a single impact, a cracked or broken shroud can allow water intrusion and accelerate coil corrosion.
Coleman Mach part 8335A5291 is the correct replacement shroud for the 7000, 8000, and 4800 series Coleman Mach (formerly RVP) rooftop air conditioners. It matches the original mounting hole pattern and profile, so installation is a straightforward swap using the existing hardware on most units.
Matches factory mounting pattern for 7000, 8000, and 4800 series units -- no drilling or cutting required.
Molded from UV-stabilized ABS plastic, the same material spec used in original Coleman Mach production shrouds.
Factory black color coordinates with Coleman Mach black-shroud configurations. Not compatible with white-shroud models.
Restored shroud integrity keeps rain, road grime, and debris off the condenser coil and electrical components.
This shroud is confirmed for the following Coleman Mach / RVP rooftop AC series:
If your unit carries a Coleman Mach or RVP badge and falls into one of these series, verify your existing shroud shape matches the replacement profile before ordering. Units with the original black shroud configuration take this part directly.
Replacement requires accessing the roof-mounted unit. On most installations, the old shroud lifts off after removing the perimeter screws (typically Phillips or 5/16 in. hex head). Reuse your existing hardware unless the screws show corrosion -- stainless replacements are widely available in the correct size. No special tools beyond a basic screwdriver or nut driver are required.
Coleman Mach has produced many shroud profiles over the years. The 8335A5291 is correct for the 7000, 8000, and 4800 series. For other series (48000 BTU units, 15,000 BTU Mach 15, or Mach 10 low-profile units), verify your unit's model number against Coleman Mach's parts lookup before ordering. The model number is printed on the rating label inside the return air grille on the ceiling assembly.
This is the black shroud (part 8335A5291). If your original shroud was white or polar white, this part will not match. White-shroud configurations require a different part number. Check your existing shroud color before purchasing.
While the shroud is off, inspect the condenser coil fins for debris buildup and the fan blade for cracks or imbalance. A coil cleaning with a non-acid foaming coil cleaner and a rinse takes less than 15 minutes and can noticeably improve cooling performance and reduce amp draw. Reconnect and test before closing the shroud for the season.