Home > Appliances > RV Central Vacuum Systems >

HP Products Dirt Devil 4949 Light Almond Central Vacuum Inlet Door -- 1-1/2 Inch PVC Replacement

HP Products Dirt Devil 4949 light almond PVC central vacuum inlet door replacement with 1-1/2 inch diameter hole
Dirt Devil Light Almond Inlet Door
 
Alternative Views:


: $5.36
Part Number: 4949
Manufacturer: HP Products

Quantity in Stock :2

Availability: In Stock
Qty:

 
HP ProductsPart 4949Universal FitDirt Devil 4949 Light Almond Central Vacuum Inlet Door

A cracked, discolored, or missing central vacuum inlet door is more than cosmetic -- it lets debris and air leak into the system when not in use. The HP Products Dirt Devil 4949 is a straightforward, universal-fit replacement door sized for standard 1-1/2 inch central vacuum inlet valves and finished in light almond to blend with common wall and trim colors found in RVs and residential installations alike.

Drop-In Replacement for Standard Central Vac Inlet Valves

Central vacuum inlet doors take daily abuse -- they get kicked, stepped on, and forced open by hose cuffs hundreds of times over their life. When the door cracks or the hinge pin breaks, the whole inlet looks shabby and the valve loses its dust seal. The Dirt Devil 4949 restores the inlet to like-new condition without replacing the entire valve body.

The door is molded from durable PVC in a light almond finish, one of the most common neutral tones used in RV interiors and older residential construction. If your existing inlet surround is almond or bisque, this door is likely your match.

Universal 1-1/2 Inch Fit

Designed around the standard 1-1/2 inch central vacuum inlet opening used across most Dirt Devil and compatible third-party inlet valve bodies.

Durable PVC Construction

Rigid PVC resists cracking under repeated hose-cuff impact and holds its color without yellowing as quickly as cheaper ABS alternatives.

Light Almond Finish

Neutral almond tone coordinates with common RV and residential wall plates, switch covers, and outlet surrounds without painting or modification.

Lightweight -- 1 lb

At just 1 lb, the door adds no meaningful stress to the inlet valve body or wall mounting, even in thin-wall RV panel installations.

Where This Part Is Commonly Used

The 4949 inlet door is used wherever Dirt Devil or compatible central vacuum inlet valves are installed. Common applications include:

  • Class A and Class C motorhomes with factory or aftermarket central vacuum systems
  • Fifth wheels and large travel trailers equipped with built-in central vac
  • Residential central vacuum installations using Dirt Devil or HP Products valve bodies
  • Retrofit central vacuum systems using standard 1-1/2 inch inlet hardware
Easy Owner Install: Replacement inlet doors typically snap or pin into the existing valve body hinge points. No tools or adhesive required in most cases -- just remove the broken door and seat the new one into the hinge slots on the valve surround.

Matching Your Existing Inlet Color

HP Products and Dirt Devil central vacuum inlets are available in multiple color families -- white, ivory, light almond, and almond are all distinct shades. Light almond sits in the warm neutral range, slightly darker and more beige-toned than bright white. Before ordering, compare the 4949 to your existing surround in natural light. If your inlet body is bright white, the 4949 will not be a match.

Color Note: Light almond (4949) is a warm, slightly tan neutral -- not the same as bright white or true almond. It is a common match for late 1990s through mid-2000s RV interiors and residential walls painted in off-white or linen tones.

What Is and Is Not Included

  • Includes: one (1) replacement inlet door in light almond PVC
  • Does NOT include: the inlet valve body, wall surround plate, hose, or any hardware
  • Hinge pins or retaining clips, if required, should be sourced from the original valve or ordered separately
Maintenance Tip: While the inlet door is removed, wipe down the valve body interior and check the rubber gasket or flap seal inside the inlet. A worn seal lets unfiltered air bypass the hose cuff and can reduce system suction. Replace the seal if it shows cracking or deformation.

Product Specifications

ManufacturerHP Products (Dirt Devil)
Part Number4949
Product TypeCentral Vacuum Inlet Door (replacement)
Color / FinishLight Almond
MaterialPVC (rigid)
Inlet Opening Diameter1-1/2 inches
Weight1 lb

Compatibility

Fits Valve TypeStandard 1-1/2 inch central vacuum inlet valves
Brand CompatibilityDirt Devil central vacuum inlet bodies; compatible third-party valves with matching hinge geometry
ApplicationRV central vacuum systems, residential central vacuum
ReplacesCracked or broken light almond inlet door on matching HP Products / Dirt Devil valve surrounds

Physical Details

Component SuppliedDoor panel only
Hardware IncludedNone
Valve Body IncludedNo
Installation TypeHinge-pin replacement, tool-free in most applications
Important Information
  • This listing is for the inlet DOOR ONLY -- the valve body, surround, hose, and hose cuff are NOT included.
  • Light almond is a warm beige-neutral tone. It will not match bright white or true almond valve surrounds. Verify your existing color before ordering.
  • Confirm your existing inlet valve uses a 1-1/2 inch opening and compatible hinge-pin geometry before purchase.
  • Do not force a mismatched door into a valve body -- doing so can crack both the door and the valve surround.
  • This part is not a watertight seal -- it is a dust cover. It is not rated for exterior or wet-bay use.


Browse for more RV Accessories in the same category as this item:

Appliances > RV Central Vacuum Systems
RV Accessories
Appliances