One piece of equipment is all it takes to lock your tandem tires in place. The Eaz-Lift 44662 wedges firmly between dual tires, bites with raised ribs on both contact faces, and locks down with the included keyed padlock -- so your rig stays put on any slope or uneven surface while you set up camp or work underneath.
Tandem-axle RVs, trailers, and fifth wheels are susceptible to creep and tire shift when parked on grades or soft ground. The Eaz-Lift 44662 addresses this with a single metal chock unit that spans the gap between adjacent tires, applying clamping force across both contact faces simultaneously. No separate left and right pieces to lose or misalign.
The zinc-plated steel body resists corrosion for long-term storage in your basement compartment or truck bed without the rust and degradation common to uncoated hardware. Raised ribs stamped into each contact face dig into the tire sidewall to resist slippage under load -- even on wet pavement or gravel pads.
Adjustable to fit tire spacing from 3 inches to 10 inches, covering most tandem-axle RV and trailer configurations without adapters.
Stamped ribs on both tire-contact faces increase grip and reduce the risk of the chock walking or slipping when the tire is under load.
Comfort-grip ratchet wrench ships with the unit for fast tightening and removal -- no hunting for a separate tool at the campsite.
A padlock is included to secure the wheel stop in position and deter unauthorized removal when the rig is left unattended.
Slide the chock between the two tandem tires in the gap you want to secure. Use the included ratchet wrench to tighten the clamping mechanism until both raised-rib contact faces press firmly against the tire sidewalls. Snap the included padlock through the locking point to prevent loosening or removal. Reverse the process to release. The 14-inch height keeps the unit stable during installation without tipping.
The zinc-plated finish protects the steel body from rust during off-season storage and wet-weather use. Store the chock in your RV's exterior storage bay, truck bed toolbox, or a gear bag. The compact collapsed dimensions (14 in. H x 4 in. D x 3 in. W) mean it takes up minimal space even in a crowded compartment.
The Eaz-Lift 44662 is backed by a limited 90-day warranty from Camco against defects in materials and workmanship.