Electronic heat strip installation kit for compatible R32 Furrion Chill HE RV air conditioner systems. Adds 1,500 watts of supplemental electric resistance heat to help take the chill out of the RV interior during mild cool-weather conditions.
The Furrion 2024031594, manufacturer reference C-FACR15HESA2-A01, is an electronic heat strip installation kit designed for compatible R32 Furrion Chill HE RV air conditioner systems. It provides electric resistance heat through the rooftop A/C system to help warm the coach when temperatures are cool but full furnace operation may not be necessary.
This 1,500W heat strip add-on is useful for chilly mornings, cool evenings, and shoulder-season camping when you want supplemental warmth from the air conditioner system. It is an electronic-type heat strip and should be matched to the correct Furrion A/C system generation before ordering.
Adds supplemental electric resistance heat through compatible Furrion A/C systems
Designed for compatible R32 Furrion Chill HE RV air conditioner applications
Made for compatible electronic-control Furrion air conditioner setups
Helps take the chill out of the RV without relying entirely on propane heat
This kit is the electronic type heat strip for compatible R32 Furrion Chill HE air conditioner systems. It is not a universal RV A/C heat strip, not a furnace, not a heat pump, and not the complete rooftop air conditioner. Confirm your Furrion air conditioner model, refrigerant generation, controller type, thermostat setup, and air distribution box compatibility before ordering.
A heat strip is intended to provide supplemental electric resistance heat through the A/C system. It is best for taking the chill off during mild cool-weather conditions. It is not a replacement for the RV furnace in freezing temperatures and does not operate like a true heat pump. Use the RV’s primary heating system when stronger cold-weather heating is required.
1. Confirm System Compatibility: Verify the rooftop unit, refrigerant generation, thermostat, controller, and A/C control type before installation. 2. Disconnect Power: Turn off power to the RV air conditioner system before removing covers or accessing internal components. 3. Access Rooftop Unit: Remove the A/C cover or shroud according to the Furrion service instructions. 4. Install Heat Strip: Mount and connect the heat strip kit following the installation manual, keeping wire harnesses clear of the heater element and moving components. 5. Test Operation: Restore power and verify proper heat strip operation through the compatible thermostat or control system. RV air conditioner electrical service should be performed by a qualified RV technician. Always follow the Furrion installation manual and disconnect power before service.
• (1) Furrion Electronic Heat Strip Installation Kit
Furrion / Lippert Customer Support: Phone: 432-LIPPERT (432-547-7378) Website: furrion.com or lippert.com Furrion is a Lippert brand for RV appliances, air conditioners, electronics, observation systems, and related replacement parts.