• Pole angles in from ground level and secures the pole in two places, using the Patented Mounting System.
• Allows you to install the dish above the RV safety without climbing the Ladder.
• 2-inch diameter aluminum sectional pole won't collapse, won't lock up and adjusts to the perfect height for setup
• Two methods of cable management in 4 ft sections for storage.
• Pole sections are a combination of swaged diameters and dual spring buttons to create a sturdy pole for your dish.
• Adapter allows the Starlink cable to run either on the outside or inside of the pole.
• Patented “two” mount holding system distributes the wind loading stresses throughout all ladder supports, keeping the user out of harms way by ground level installation.
• Light weight aluminum poles, fiberglass filled nylon, and stainless steel hardware (they won't rust) - unlike powder coated mounts.
• Do not pull cable tight. Leave cable loose at the top for Dishy rotation.
• It is not recommended to run the cable down the center of the pole. If you choose to run the cable inside of the pole, the drain hole in our 2.0 Lower Mount (Cup) will need to be enlarged to fit the Starlink cable plug (.53").
• It is not recommended to fly a flag with the Starlink.
• It is not recommended to drive with the Starlink installed.
• It is not recommended to use more than (4) pole extensions.
• Be careful around power lines.
• Take down in high winds.
• KIT INCLUDES:
  • (1) Starlink Adapter "Starship" (Patent Pending)
  • (2) 4ft Aluminum Pole Sections (20 Gage @ 2inch dia., spring buttons)
  • (3) Cable Clamps
  • (1) Jumbo Pole Bag
  • (1) 2.0 Dia. Upper Pole Holder (Twist)
  • (1) 2.0 Dia. Lower Pole Holder (Cup)
  • (2) Mounts (on 1.00" dia. RV Ladder or Flat Surface)
  • (2) Mount Caps (can be replaced for larger dia. ladders)
  • (10) Nuts (nylock)
  • (8) Bolts (stainless steel, allen screws)
  • (1) Plastic Thumb Screw (for directional pole control)
  • (1) Allen Wrench
  • Color: Grey
  • Weight: Approximate 6 lbs.
  • 1-year Manufacturer's Warranty on the pole. (Made in China)
  • Lifetime Manufacturer's Warranty Mounts and "Starship" Adapter (Made in USA)
• Gen 3 Starlink ladder mount kit: 106983-K
• Suction cup mount kits are also available:
  • Mini Starlink: 106967-3MK
  • Gen 2 Starlink: 106967-K
  • Gen 3 Starlink: 106967-3K
• STARLINK DISH NOT INCLUDED

Flagpole Buddy GEN 2 Starlink RV Ladder Mounting Kit