Replace or install a leaf-spring mounting seat on a compatible 2-3/8" round trailer axle. The Husky SS238 is a formed steel weld-on spring seat commonly used with 3,500 lb trailer axles.
The Husky SS238 provides the mounting surface between a compatible trailer axle tube and leaf spring. Its formed shape fits a 2-3/8" round axle tube, while the pre-punched center hole aligns with the spring center bolt during suspension installation.
Designed for weld-on installation, the SS238 is commonly used when repairing or building trailer suspensions equipped with 3,500 lb axles.
Formed to fit compatible round trailer axle tubes measuring 2-3/8" in diameter
Commonly used with compatible 3,500 lb trailer axle assemblies
Durable formed steel construction for trailer suspension applications
Designed to be welded directly to the axle tube at the required spring location
Spring seats must be positioned correctly to maintain axle alignment and suspension geometry. Welding should be performed using procedures appropriate for the axle manufacturer and tube material. Verify spring-center spacing and axle orientation before welding.
In The Package: • 1 Husky SS238 Leaf Spring Seat
This spring seat is designed for 2-3/8" round axle tubes. Confirm the outside diameter of the existing axle tube before ordering. Other Husky spring-seat sizes are available for different axle diameters.