|WHAT IS THE
The Charge Wizard is a microprocessor-controlled device
designed to operate exclusively with Progressive Dynamics 9100
Series Inteli-Power Converters. It constantly monitors the RV
battery, then automatically adjusts the converter output voltage
based on its charge status. The Charge Wizard has four (4)
operating Modes (BOOST, NORMAL, STORAGE AND EQUALIZE). Each Mode
is automatically selected by the microprocessor and ensures a
fast yet safe recharge for your RV battery.
Charge Wizard Indicator...
The Charge Wizard has a light that indicates the Mode it is
operating in as follows.
LIGHT “ON” AT ALL TIMES – Indicates the Charge Wizard is in
the Boost Mode (Converter output voltage set to 14.4-volts)
LIGHT “BLINKS” ON AND OFF FROM ONCE TO MANY TIMES A SECOND. –
The Charge Wizard is in the Normal Mode (Converter output
voltage set to 13.6-volts).
LIGHT “BLINKS” ON AND OFF APPROX. EVERY 5 SECONDS. – The
Charge Wizard is in the Storage Mode (Converter output voltage
set to 13.2-volts).
The Mode Select Switch...
The Charge Wizard functions are fully automatic however, you
can test the Charge Wizard’s functions manually by pressing and
holding the MODE SELECT SWITCH BUTTON DOWN. When the button is
first pressed, the light will be “ON” all the time, indicating
it is in the BOOST Mode (converter output 14.4 VDC). If you
continue to hold the button, the unit will switch to the NORMAL
Mode (converter output 13.6 VDC) and the light will blink from
once to many times a second. If you continue to hold the button
down the unit will go into the STORAGE Mode (converter output
13.2 VDC) and the light will blink approximately every five- (5)
seconds. NOTE: No matter which mode you manually select, the
Charge Wizard will automatically return to the NORMAL Mode of
operation after 4 -hours.