Home > Lippert Repair Parts > Electric and Hydraulic Slide-Out Parts >

Lippert 124000 Flush Fixed V-Tech Head Tall and Extended RV Slide-Out Cover
Lippert 124000 Flush Fixed V-Tech Head Tall and Extended RV slide-out topper replacement component
Lippert 124000 Flush Fixed V-Tech Head - Tall & Extended
  
: $72.75
Part Number: 124000
Manufacturer: Lippert
NOTE: Ships in 5 to 7 days

Quantity in Stock :1

Availability: In Stock
Qty:

 
LippertPart 124000Slide-Out TopperLippert 124000 Flush Fixed V-Tech Head -- Tall and Extended

The Lippert 124000 is the Tall and Extended version of the Flush Fixed V-Tech Head, a key structural and sealing component used in Lippert V-Tech slide-out topper systems. If your existing head is cracked, warped, or missing, this is the correct OEM-style replacement to restore proper topper function and protect your slide room from water intrusion and debris.

Protect Your Slide Room with the Right Replacement Head

The V-Tech slide-out topper system from Lippert is one of the most widely deployed awning-style slide covers in the RV industry, found on travel trailers, fifth wheels, and motorhomes from dozens of manufacturers. The topper head -- the extruded housing that anchors the fabric roll and defines the topper's profile at the coach wall -- takes constant exposure to UV, road vibration, and weather loading.

The 124000 is specifically the Flush Fixed configuration in the Tall and Extended size class. "Flush Fixed" describes how the head mounts flat against the coach sidewall with no adjustable pivot, and "Tall and Extended" refers to the larger profile dimension that accommodates deeper slide rooms and wider fabric rolls. Ordering the correct size and mount style is critical -- a standard or short head will not align with the roller tube or fabric on a Tall and Extended installation.

OEM Lippert Fitment

Direct replacement for V-Tech topper systems originally equipped with the Tall and Extended Flush Fixed head. Matches factory mounting hole pattern and roller tube interface.

Flush Fixed Mount

Designed to sit flat against the coach sidewall. No pivot adjustment required. Correct configuration for coaches where the topper runs parallel to the wall surface.

Tall and Extended Profile

Larger head profile accommodates deeper slide room projections and wider fabric rolls, providing full coverage and proper fabric tension across the slide top.

UV and Weather Resistant

Constructed from materials consistent with Lippert's V-Tech topper line, engineered to handle prolonged outdoor exposure, road vibration, and temperature cycling.

Understanding V-Tech Topper Head Configurations

Lippert's V-Tech topper heads come in several configurations that are not interchangeable:

  • Mount style: Flush Fixed vs. adjustable-angle versions. The 124000 is Flush Fixed -- it does not pivot.
  • Height/Profile: Standard, Tall, and Extended variants correspond to different slide room depths and fabric roll diameters. The 124000 covers the Tall and Extended class.
  • Side: Some head assemblies are side-specific (driver vs. passenger). Verify your installation before ordering.
  • Fabric compatibility: The head must match the fabric roll width and roller tube diameter already installed on your rig.
Correct Part Verification: Before ordering, compare your existing head's physical profile and mounting hole spacing against the 124000. If your coach has an adjustable or pivot-style topper head, this flush fixed unit will not be the correct replacement. Check your original Lippert installation documentation or the label on the existing topper arm for the part number.

Common Replacement Scenarios

The 124000 head is typically needed when:

  • The existing head housing is cracked or broken due to impact or UV degradation
  • The fabric is no longer tracking correctly due to a warped or damaged head
  • Replacing an entire topper assembly and sourcing the head separately
  • Performing a warranty or insurance repair after slide-room damage
Topper Fabric and Hardware: This listing covers the head component only. Replacement fabric, roller tubes, mounting hardware, and end caps are separate items. If you are replacing the full topper, confirm all sub-components are compatible before installation.

Installation Notes

Replacing a V-Tech topper head is a manageable DIY task for most RV owners comfortable with basic hand tools. The flush fixed head mounts to the coach wall using the existing fastener pattern. Remove the old head, transfer the roller tube and fabric assembly to the new head, and re-secure to the wall. A second person is strongly recommended when handling the roller tube assembly.

Ladder and Roof Safety: Slide-out topper work typically requires ladder access along the coach sidewall. Use a spotter, work on level ground, and ensure the slide room is fully extended before beginning disassembly. Never work on a topper with the slide in motion.
Maintenance Tip: After installation, inspect the fabric tension and tracking with the slide cycled in and out several times. Re-tension the spring inside the roller tube if the fabric sags or does not retract evenly. Lubricate pivot points and end cap bearings annually with a silicone-based lubricant to extend topper life.

Part Identification

ManufacturerLippert Components
Part Number124000
Product LineV-Tech Slide-Out Topper
Component TypeFlush Fixed Head Assembly
Size ClassTall and Extended

Configuration Details

Mount StyleFlush Fixed (non-pivoting, mounts flat to coach wall)
Profile ClassTall and Extended (larger profile for deeper slides)
Compatible Topper LineLippert V-Tech slide-out topper systems
Side SpecificityVerify driver/passenger orientation before ordering

Compatibility Reference

Topper SystemLippert V-Tech (Flush Fixed installations)
Slide TypeSlide-out rooms requiring Tall and Extended head profile
Common Coach TypesFifth wheels, travel trailers, Class A/C motorhomes with Lippert slides
ReplacesDamaged or worn Lippert 124000 head on existing V-Tech topper

What Is Included

IncludedV-Tech Flush Fixed Head (Tall and Extended) -- 1 piece
Not IncludedTopper fabric, roller tube, end caps, mounting hardware, motor (if powered)
Important Information
  • This is the Flush Fixed configuration only -- do not use as a replacement for pivot-style or angle-adjustable V-Tech topper heads.
  • Tall and Extended size is not interchangeable with Standard or Short head variants -- measure your existing head before ordering.
  • Verify driver-side vs. passenger-side orientation if applicable to your specific topper installation.
  • This part covers the head assembly only. Fabric, roller tube, end caps, and hardware are sold separately.
  • Installation should be performed with the slide room fully extended and the coach on level ground. Use a second person when handling the roller tube assembly.
  • Confirm your coach's topper was factory-installed with a Lippert V-Tech system before ordering -- other topper brands use non-compatible head designs.


Browse for more RV Accessories in the same category as this item:

Lippert Repair Parts > Electric and Hydraulic Slide-Out Parts
Lippert Repair Parts