The Lippert 125462 is a slotted spring (roll) pin measuring 0.1562 inches (5/32") in diameter and 1.0 inch in length. This small but critical piece of hardware is a required component when installing the Lippert 113406 Rear Electric Stabilizer Jack Adapter. Both roll pin 125462 and roll pin 181003 must be used together to complete a proper installation.
Roll pins -- also called spring pins or slotted pins -- are hollow, cylindrical fasteners with a lengthwise slot that allows them to compress slightly on insertion. This spring tension holds them firmly in the bore, creating a reliable, vibration-resistant connection without threads or additional fasteners. In RV stabilizer jack assemblies, they secure adapter components against the rotational and axial loads encountered during leveling and road travel.
If you are replacing a lost or damaged pin during a Lippert 113406 adapter installation, or completing a repair on an existing electric stabilizer jack setup, this is the correct OEM-spec replacement pin to source.
Exact Lippert factory spec: 0.1562" (5/32") diameter x 1.0" length. Matches the bore dimensions of the 113406 adapter assembly.
Slotted roll pin construction compresses for insertion and expands to grip the bore, resisting loosening from vibration during travel.
Installation of the Lippert 113406 adapter requires BOTH pin 125462 and pin 181003. Order both if starting a fresh install or replacing lost hardware.
Sourced to Lippert part number 125462, vendor part 18-5080. Ensures correct fit and function within Lippert-engineered stabilizer jack systems.
This roll pin is specifically called out in the Lippert 113406 Rear Electric Stabilizer Jack Adapter installation. That adapter fits tubular stabilizer jack legs with an inner diameter of 9/16" to 5/8" and an outer diameter of 7/8", at an overall adapter length of 2-1/2". If you are working with that adapter -- or replacing worn hardware in an existing assembly -- the 125462 pin is the correct size.