Home > Steps & Ladders > RV Entry Steps >

Lippert 165221 Anti-Skid Step Tape with Glow Strip 25 in. x 8 in. for RV Steps

Lippert 165221 anti-skid peel-and-stick step tape 25 x 8 inches with glow-in-the-dark strip for RV motorized steps
Lippert Anti-Skid Step Tape - 25" x 8"
 
Alternative Views:


: $31.04
Part Number: 165221
Manufacturer: Lippert
NOTE: Ships in 5 to 7 days

Quantity in Stock :

Availability: Out of Stock
Qty:

 
Lippert 25 in. x 8 in. Glow-in-the-Dark Strip Lippert 165221 Anti-Skid Step Tape -- 25 in. x 8 in.

Restore safe footing on your RV entry steps with this peel-and-stick anti-skid tape. The textured surface adds grip underfoot while the built-in glow-in-the-dark strip makes the step edge visible at night -- a simple upgrade that reduces slip risk for every entry and exit.

Traction You Can Install in Minutes

Worn or missing step tape is one of the most common causes of entry-step slip incidents on RVs. Lippert's 165221 anti-skid tape is a direct fit for Kwikee and Lippert motorized step systems, covering the full step width with an aggressive textured surface. The pressure-sensitive adhesive backing bonds directly to the step pan -- no tools, no fasteners, no special prep beyond cleaning the surface.

The integrated glow-in-the-dark strip runs the length of the tape, giving you a visible edge reference when stepping down in low-light conditions -- campsite nights, pre-dawn departures, or navigating a dark parking lot.

Peel and Stick

Pressure-sensitive adhesive backing. Clean the step surface, peel the liner, press in place -- no adhesive primer required for most applications.

Glow-in-the-Dark Strip

Built-in luminescent strip marks the step edge in low-light conditions, improving visibility during night arrivals and early-morning departures.

Full Step Coverage

At 25 in. x 8 in., this tape covers the standard Kwikee and Lippert motorized step pan width in a single piece -- no piecing together multiple strips.

Direct OEM Cross-Reference

Cross-references to Kwikee PN 379518, Lippert manufacturer ref 909334000, and Jayco PN 0213892 -- making it easy to confirm fitment against your existing parts list.

Fitment and Compatibility

This tape is sized and sourced for Lippert and Kwikee motorized entry step systems commonly found on Class A, Class C, and fifth-wheel RVs. It is the same tape used by Jayco and other OEM manufacturers as a factory-installed tread on these step pans.

  • Designed for Lippert / Kwikee motorized step pans -- standard 25 in. wide step
  • Kwikee replacement part number: 379518
  • Lippert manufacturer reference: 909334000
  • Jayco OEM part number: 0213892
  • Sold individually -- one tape per package
Easy DIY Replacement: If your current step tape is peeling, cracked, worn smooth, or missing entirely, this is a straightforward swap. Remove the old tape (a heat gun or hair dryer softens the adhesive), clean the step pan with isopropyl alcohol, and press the new tape in place. No drilling, no screws.

Why Replace Step Tape?

Step tape takes constant abuse -- foot traffic, road grime, UV exposure, rain, and freeze-thaw cycles all degrade the textured surface over time. A worn-smooth step tread offers little more grip than bare metal, especially when wet. Replacing the tape is one of the lowest-cost, highest-safety-impact maintenance tasks on any towable or motorized RV.

Maintenance Tip: Inspect step tape at the start of each camping season. Look for lifted edges, bubbling, or areas where the texture has worn flat. Catching degradation early prevents moisture from working under the tape and corroding the step pan.

Application Tips

  • Clean the step surface thoroughly with isopropyl alcohol and allow to dry completely before application.
  • Apply in temperatures above 50 deg F for best adhesive bonding.
  • Use a rubber roller or firm hand pressure to eliminate air bubbles, starting from the center and working outward.
  • Allow 24 hours of cure time before heavy foot traffic if possible.
  • Trim edges with a sharp utility knife if needed for a clean fit around step hardware.
Longevity Note: Parking your RV with the steps deployed exposes the tape to additional UV and weather. Retracting steps when not in use extends tape life and keeps the adhesive bond intact longer.

Product Specifications

Lippert Part Number165221
Kwikee Part Number379518
Lippert Mfr. Reference909334000
Jayco Part Number0213892
UPC848150037534

Dimensions and Weight

Length25 in.
Width8 in.
Weight0.2 lbs.
QuantitySold individually (1 tape)

Features

BackingPressure-sensitive self-adhesive
Safety FeatureGlow-in-the-dark strip
Application MethodPeel and stick
Surface TextureAnti-skid / grip texture

Compatibility

Step SystemLippert and Kwikee motorized RV entry steps
OEM ApplicationsJayco and other manufacturers using Kwikee step systems
Typical RV TypesClass A motorhomes, Class C motorhomes, fifth wheels, travel trailers with motorized steps

What Is Included

In the Box1x anti-skid step tape (25 in. x 8 in.)
Not IncludedAdhesive primer, installation tools, replacement steps
Important Information
  • This tape is designed for step pan surfaces -- do not apply over existing loose or bubbled tape. Remove old tape and clean the surface first for a lasting bond.
  • Adhesive performance is reduced if applied below 50 deg F. Cold-weather installs may result in lifting edges.
  • The glow strip requires brief exposure to light to charge. It is a visibility aid, not a substitute for proper campsite lighting.
  • Sold individually. If your step system has multiple steps, you will need one tape per step.
  • Verify your step pan width before ordering. This tape is sized for standard 25 in. Kwikee / Lippert step pans. Non-standard or aftermarket steps may require trimming or a different size.


Browse for more RV Accessories in the same category as this item:

Steps & Ladders > RV Entry Steps
Steps & Ladders


$114.49
$4.91