Stop propping the door or chasing bugs out of your RV. The Lippert Screen Shot installs in minutes and pulls your screen door shut automatically every single time -- whether you are hauling in groceries or the kids are running in and out all afternoon. Elastic webbing anchors directly into the screen door's inner channel, so there are no visible springs or awkward closers hanging off the door frame.
Every time your screen door opens and fails to latch, you lose cooled or heated air and invite insects inside. The Screen Shot solves this with a simple, reliable elastic-webbing mechanism that requires no batteries, no wiring, and no adjustments after install. Custom anchors seat snugly inside your screen door's existing inner channels and are locked in place with the included anchor screws -- no drilling into the door frame.
This is a genuine Lippert (LCI) replacement and upgrade part, engineered specifically for Lippert-brand entry doors. It is not a universal fit. Check your door's identification sticker -- typically on the inside frame or in the bottom right corner of the door window -- to confirm compatibility before ordering.
Expands smoothly as the door opens, then retracts to pull it firmly shut -- no slamming, no rattling hardware.
Machined to fit snugly inside Lippert screen door inner channels; anchor screws lock them in place permanently.
Every fastener needed for installation is in the box. No extra trips to the hardware store.
Keeps conditioned air inside by eliminating the gap left by an unlatched screen door during high-traffic entry and exit.
The Screen Shot is designed to be installed by the RV owner with basic hand tools. The elastic webbing is anchored at both ends inside the screen door channel and in the door jamb area. No permanent modification to the door or frame is required beyond the provided anchor screws. Installation typically takes under 30 minutes.
Lippert entry doors carry an identification sticker on the inside of the door frame. Most LCI entry doors also display an LCI decal in the bottom right corner of the door window. Locate this sticker and confirm your door is a Lippert right-hand entry door measuring 28 inches before ordering.
Conventional spring closers attach to the face of the door and frame with exposed hardware that can snag, corrode, or work loose over miles of road vibration. The Screen Shot routes the closing force through the door's own inner channel, keeping the mechanism protected and out of the way. The elastic webbing absorbs the closing load gradually, so the door pulls shut firmly without the hard slam of a heavy spring.