If you have ever wrestled a leaking, floppy sewer hose at a campground dump station, the Waste Master system was designed for you. Lippert engineered this complete sewer management kit to address every frustration of traditional RV waste hose setups -- from leaky couplings and hose collapse to unsanitary storage and slow drainage. It extends precisely as far as you need it, seals securely, and collapses clean for compact, sanitary storage.
Standard RV sewer hoses are notorious for sagging mid-run, trapping waste inside the corrugations, and leaking at the fittings every season. The Waste Master system addresses all three problems with a purpose-built design that keeps the hose extended at the correct length, bonds the end cuffs permanently to eliminate leak points, and features a 90-degree discharge nozzle that locks securely into virtually any standard campground sewer inlet.
The system ships as a complete, ready-to-use kit. You get the 18 ft hose with permanently attached nozzle and the cam lock assembly with protective cap -- everything needed to connect, dump, rinse, close off the valve, and store, all without touching waste at any step.
See exactly when your tanks and hose are fully evacuated. The transparent viewport on the nozzle removes the guesswork and helps prevent premature disconnection.
The permanently molded nozzle includes an internal valve so you can close off the system at the terminal end before disconnecting, keeping waste contained and the ground clean.
The cam lock coupler creates a fast, tool-free connection to your RV drain outlet. No threads to cross, no collars to tighten -- lock, dump, and release.
The hose material is UV-protected and engineered to resist punctures and abrasions from asphalt, gravel, and concrete surfaces common at campgrounds and dump stations.
One of the persistent problems with traditional accordion-style sewer hoses is that the corrugated walls create pockets where solid waste collects and dries, leading to odor and blockage over time. The Waste Master hose is designed to minimize internal waste trapping by maintaining its shape and slope during use. The advanced construction holds the hose extended to exactly the length you need -- no more hose lying flat on the ground, pooling waste in the low spots.
Bonded cuffs at each end replace the pushed-on or glued fittings found on budget hoses. These permanent seals are the most common leak point on traditional setups, and eliminating them as a failure mode is one of the most practical upgrades the Waste Master delivers.
Full extended length is 18 ft -- enough reach to handle most pull-through sites and a large number of back-in sites without repositioning the rig. When the job is done, the hose compresses down to approximately 5.5 ft, making it manageable for under-bay storage or a standard RV sewer hose carrier tube.
Weekend warriors benefit from the speed of the cam lock connection -- hook up and break down faster than wrestling threaded fittings. Full-timers and long-term campers will appreciate the durability of the UV-resistant hose material and the viewport that becomes second nature for confirming clean tanks on a weekly or biweekly dump cycle.