Sleek, form-fitting marine-grade step tread covers for wide MORryde Gen II StepAbove® steps. Water-wicking, slip-resistant, and pet-friendly. Peel-and-stick installation. Pack of 4 — includes one deep top step cover and three standard lower step covers.
RV entry steps endure constant wear from foot traffic, weather, pet claws, and outdoor elements — all of which degrade traction and create slip hazards over time. The MORryde STP54-067 Step Tread Covers are the purpose-designed replacement for the wide MORryde Gen II StepAbove® 4-step configuration, crafted from marine-grade flooring material that delivers reliable slip resistance, water-wicking performance, and a clean, factory-finish appearance in one easy peel-and-stick application.
The pack includes four covers precisely sized for the Gen II StepAbove® wide step geometry: one deeper cover for the top step (which is uniquely deeper on Gen II systems) and three standard covers for the lower steps. The marine-grade material is built for outdoor durability — UV-resistant, moisture-resistant, and tough enough to handle daily pet and passenger traffic while maintaining secure footing in all conditions.
Marine-grade material withstands pet claws and daily pet traffic without tearing, peeling, or losing its grip surface
Wicks moisture away from the step surface and maintains slip-resistant traction in wet, muddy, or damp conditions
Built from durable flooring material proven in harsh marine environments — UV-resistant and long-lasting outdoors
No tools, no adhesives, no drilling — simply peel the backing and press onto each step surface for a clean, secure fit
MORryde explicitly requires that you measure your steps before ordering. The STP54-067 multi-pack is specifically designed for MORryde Gen II StepAbove® wide steps and accounts for the deeper top step unique to that system. It is not a universal fit for all RV entry steps. This pack is the correct choice if you have: • MORryde Gen II StepAbove® wide steps (23.5" wide) • A 4-step configuration with a deeper top step This pack is NOT the correct choice if you have: • Narrow steps (under 23.5" wide) — see the narrow step tread options • Steps from a different manufacturer or step system • Steps that do not have the Gen II deeper top step • A different step count — 3-step wide (STP54-066) or narrow packs (STP54-068/069) When in doubt, measure your step width and depth before purchasing.
MORryde offers step tread covers in multiple configurations for narrow and wide Gen II StepAbove® steps. Match your step count and width: Wide Step Packs (23.5" wide — Gen II StepAbove®): • STP54-066 — 3-Step Wide Pack • STP54-067 (This Product) — 4-Step Wide Pack Narrow Step Packs (19.5" wide): • STP54-068 — 2-Step Narrow Pack • STP54-069 — 3-Step Narrow Pack Individual Replacement Covers (Wide): • STP54-071 — Single Deep Step Cover (23.5" x 9.5") — for top step replacement only • Individual standard step covers also available through authorized dealers Individual covers are not available at ShopMORryde.com and must be purchased through authorized dealers.
Installation Steps: 1. Measure Your Steps: Confirm your step width is 23.5" and you have a Gen II StepAbove® 4-step configuration with a deeper top step before proceeding 2. Clean Step Surfaces: Wipe all step surfaces clean and dry — remove dirt, grease, and moisture for best adhesion 3. Position Top Step Cover: Align the 23.5" x 9.5" cover on the top (deeper) step, ensuring even overhang on all sides 4. Peel and Press: Remove the backing and press the cover firmly onto the step surface, smoothing from center outward to prevent air bubbles 5. Repeat for Lower Steps: Apply the three 23.5" x 7" covers to the lower steps in the same manner, working from top to bottom 6. Allow to Set: Allow adhesive to cure per the installation instructions before heavy foot traffic Refer to MORryde's Step Tread Covers Installation Instructions for complete guidance.
In The Box (Pack of 4): • (1) Top Step Tread Cover — 23.5" x 9.5" (Deep) • (3) Lower Step Tread Covers — 23.5" x 7" each • Peel-and-Stick Backing Pre-Applied NOT Included / NOT Required: • No additional adhesive needed • No tools required for installation
MORryde Technical Support: Phone: (574) 293-1581 Email: [email protected] Made in Elkhart, Indiana, USA MORryde is an ISO 9001 certified manufacturer of RV entry, safety, and specialty vehicle products.
Measure your step width and count before ordering. Multi-packs are designed specifically for MORryde Gen II StepAbove® steps with the deeper top step.
Always measure your steps before ordering. Contact MORryde at (574) 293-1581 if you are unsure which pack is correct for your step system.