Raise a MORryde sliding cargo tray to clear the lip of an RV basement storage compartment with the CTG54-001 riser kit. Six adjustable riser brackets provide four height settings from 1-5/8" to 3-1/8" and work with all MORryde cargo trays.
The MORryde CTG54-001 is designed for RV storage compartments where the door-frame lip sits higher than the standard cargo tray slide. Raising the tray allows it to extend over the compartment threshold instead of contacting the lip during operation.
Six riser brackets install along the cargo tray side rails and provide four available height positions. The kit works with all MORryde cargo trays, making it a flexible solution for installations that require additional clearance between the tray and compartment floor.
Raises the cargo tray by 1-5/8", 2-1/2", 2.8", or 3-1/8"
Includes the six riser brackets required for a compatible cargo tray installation
Designed to work with all MORryde sliding cargo tray models
Heavy-duty riser system supports compatible MORryde cargo tray installations
The CTG54-001 raises the entire cargo tray to provide clearance over the storage-compartment lip. Because the tray sits higher after installation, available vertical clearance above the tray will be reduced by the selected riser height.
In The Package: • 6 MORryde Cargo Tray Riser Brackets
MORryde rates the CTG54-001 riser kit for up to 800 lbs., but the complete installation must never exceed the weight rating of the cargo tray itself. MORryde CTG80 80%-extension trays, for example, are rated for 500 lbs.