Mounts securely underneath your Gen 2 StepAbove entry steps to keep dirt, mud, and debris out of your RV. Brushes on the bottom and sides clean boot soles as you wipe your feet. Detaches effortlessly for standalone scrubbing use. 17-3/8" L x 2-3/8" W x 3" H. Mounting hardware included.
Every time you come back to your RV from a hike, a muddy campsite, or a rainy day outside, you bring dirt and debris in on the bottom of your shoes — and once it's tracked into the RV, it's your problem to clean up. The MORryde STP54-062 StepAbove Step Brush puts a simple, purpose-built solution right where you need it: mounted underneath your Gen 2 StepAbove entry steps, ready to scrub boot soles before you ever set foot inside.
The brush features bristles on both the bottom and sides, so a quick wipe of each shoe cleans multiple surfaces in one motion. When it's not mounted on the step — for deeper cleaning or to scrub the step tread itself — it detaches effortlessly for standalone use. The compact 17-3/8" x 2-3/8" footprint blends neatly with the StepAbove step profile without adding bulk, and the included mounting hardware handles installation. Compatible with Gen 2 StepAbove steps only — not compatible with Flip Tread steps.
Bristles on both the bottom and side surfaces clean boot soles and edges in one swipe — more effective than a flat-only brush
Secures underneath your Gen 2 StepAbove steps — always in place, always ready, without taking up extra space
Effortlessly removes from the mounting bracket for hand-held scrubbing of boot soles or step tread surfaces
Manufactured by MORryde in Elkhart, Indiana — same quality and origin as the StepAbove step system itself
The STP54-062 Step Brush is designed to mount on Gen 2 StepAbove® steps only. MORryde explicitly states it is not compatible with StepAbove Flip Tread steps. Before ordering, confirm your step system is a Gen 2 StepAbove — Gen 2 models are identifiable by their wider top step design. If you have Flip Tread steps or Gen 1 StepAbove steps, this brush will not mount correctly on your system.
Installation Steps: 1. Confirm Compatibility: Verify your steps are Gen 2 StepAbove (not Flip Tread or Gen 1) before beginning 2. Position the Bracket: Locate the mounting position underneath the Gen 2 StepAbove step frame — refer to included instructions for the correct placement 3. Secure with Included Hardware: Attach the mounting bracket to the step using the provided hardware 4. Snap in the Brush: Insert the Step Brush into the mounted bracket until it clicks securely into place 5. Test Detach: Confirm the brush releases and re-engages smoothly for standalone use when needed Refer to the included installation instructions for complete guidance. Contact MORryde at (574) 293-1581 with installation questions.
In The Package: • (1) STP54-062 Step Brush Assembly • Mounting Hardware • Installation Instructions NOT Included: • Gen 2 StepAbove steps (required — sold separately)
MORryde Technical Support: Phone: (574) 293-1581 Email: [email protected] Made in Elkhart, Indiana, USA MORryde is an ISO 9001 certified manufacturer of RV entry, safety, and suspension products.