Try the Permatex Medium Strength Threadlocker to lock threaded fasteners and prevent them from coming loose! It eliminates the need for stocking expensive lock nuts and lock washers by preventing parts from loosening due to vibration.
- For vehicle, RV, motorcycle, heavy-duty, and marine use
- Ideally used for 1/4" to 3/4" nut and bolt applications; such as case cover bolts, valve cover bolts, water pump bolts, drive shaft bolts, and many more
- Can be removed using hand tools offering simple disassembly
- Keeps threads tight and protects them from corrosion
- Conforms to ASTM D 5363 AN0321 (Mil-S-46163A, Type II, Grade N)
- Color: Blue
- Weight: 0.5 Lbs
- OEM specified
Note: Medium Strength Threadlocker works on metal parts. It is not recommended for plastics. Cured Medium Strength Threadlocker must be sheared (hand tools will do) before parts will separate.
Note: Cannot be shipped by air.
Permatex Medium Strength Threadlocker
DIRECTIONS:
1. Clean and dry parts using Permatex® Surface Prep™ activator.
2. Shake tube of Medium Strength Threadlocker well before each use.
3. Remove cap and snip nozzle tip.
4. Apply Medium Strength Threadlocker to threaded areas and assemble parts. Refer to Technical Data Sheet for complete information.
|
