A purpose-built all-season cover for 5th wheel trailers and toy haulers from 33 to 37 feet long. The triple-ply PolyPro 3 top resists rain, snow, UV rays, and road grime while zippered side panels keep your doors and slideouts accessible throughout storage season.
The Classic Accessories Overdrive PolyPro 3 Deluxe (part 01-0840) is engineered specifically for the taller, longer profile of 5th wheel trailers. Unlike universal covers, this one accounts for the elevated front cap, hitch section, and -- on toy hauler builds -- the rear ramp door. The rear full-height zipper gives you clear access to that ramp without removing the cover entirely.
The construction uses a dual-material approach: a thick, triple-ply PolyPro 3 top panel handles the brunt of UV exposure, precipitation, and debris impact on the roof and upper sidewalls, while the single-ply PolyPro 1 side panels are intentionally more breathable to push trapped moisture out and reduce wind-load on the fabric.
Thick three-layer construction on the roof and upper panels blocks rain, UV rays, snow, dirt, and minor abrasions that degrade gel coat and roofing material over time.
Vents built into the cover allow warm, moist air to escape and reduce wind stress that can lift or tear uncovered RV covers. Single-ply PolyPro 1 sides accelerate drying.
Adjustable front and rear tension panels combined with elasticized hem corners pull the cover snug against the trailer's profile, minimizing flapping and abrasion in high-wind conditions.
The integrated rope attachment system and included toss bag let one person run the cover over the roof without crawling underneath the 5th wheel -- a real time-saver when storing solo.
Multiple zippered panels are positioned along the sides to give you entry to your RV's main entry door, utility bays, and engine or generator access areas without pulling the entire cover off. The rear full-height zipper is sized for toy hauler ramp door clearance.
At 36.5 lbs, this cover is manageable for two people. Use the included toss bag to guide the folded cover over the roof from one side. Start at the front cap, unroll toward the rear, then work the elasticized corners down and set the tension panels. Secure the underside with the rope system before the wind picks up.